BFC3366Y2 Datasheet, PDF (6/12 Pages) Vishay Siliconix – Interference Suppression Film Capacitors MKP Radial Potted Type

Not for New Design - Please refer to MKP338 6 Y2 (28114)
www.vishay.com
MKP336 6 Y2
Vishay BCcomponents
10⁶
10⁵
10⁴
0
20
40
60
80
100
T_amb (°C)
Insulation resistance as a function of ambient temperature
(typical curve)
APPLICATION NOTES
• For Y2 electromagnetic interference suppression between line and ground (50 Hz/60 Hz) with a maximum mains voltage of
300 V_AC ± 10 % instability.
• For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For
information depending of the capacitance value and the number of parallel connections contact: [e-mail].
• These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse
program must be used.
• The maximum ambient temperature must not exceed 105 °C.
• Rated voltage pulse slope:
If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 420 V_DC and
divided by the applied voltage.
Revision: 11-Dec-12
6
Document Number: 28115
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000