DG411LE Datasheet, PDF (2/17 Pages) Vishay Siliconix – Low Parasitic Capacitance and Leakage, Quad SPST Switches

www.vishay.com
DG411LE, DG412LE, DG413LE
Vishay Siliconix
TRUTH TABLE
LOGIC
0
1
Logic “0”  0.8 V
Logic “1”  2.4 V
DG411LE
ON
OFF
DG412LE
OFF
ON
TRUTH TABLE
LOGIC
0
1
Logic “0”  0.8 V
Logic “1”  2.4 V
SW₁, SW₄
OFF
ON
SW₂, SW₃
ON
OFF
ORDERING INFORMATION
TEMP. RANGE
CONFIGURATION
DG411LE
-40 °C to +85 °C
Lead-free
DG412LE
DG413LE
PACKAGE
16-pin TSSOP
16-pin SOIC
16-pin PDIP
16-pin TSSOP
16-pin SOIC
16-pin PDIP
16-pin TSSOP
16-pin SOIC
16-pin PDIP
PART NUMBER
DG411LEDQ-GE3
DG411LEDQ-T1-GE3
DG411LEDY-GE3
DG411LEDY-T1-GE3
DG411LEDJ-GE3
DG412LEDQ-GE3
DG412LEDQ-T1-GE3
DG412LEDY-GE3
DG412LEDY-T1-GE3
DG412LEDJ-GE3
DG413LEDQ-GE3
DG413LEDQ-T1-GE3
DG413LEDY-GE3
DG413LEDY-T1-GE3
DG413LEDJ-GE3
MIN. ORDER / PACK. QUANTITY
Tube 360 units
Tape and reel, 3000 units
Tube 500 units
Tape and reel, 2500 units
Tube 500 units
Tube 360 units
Tape and reel, 3000 units
Tube 500 units
Tape and reel, 2500 units
Tube 500 units
Tube 360 units
Tape and reel, 3000 units
Tube 500 units
Tape and reel, 2500 units
Tube 500 units
ABSOLUTE MAXIMUM RATINGS
PARAMETER
V+ to V-
GND to V-
V_L
I_N ^a, V_S, V_D
Continuous Current (Any terminal)
Peak Current, S or D (Pulsed 1 ms, 10 % duty cycle)
Storage Temperature
(DQ, DY suffix)
(AK suffix)
16-pin TSSOP ^c
Power Dissipation (Packages) ^b
16-pin SOIC ^d
16-pin CerDIP ^e
ESD Human Body Model (HBM); per ANSI / ESDA / JEDEC^® JS-001
LIMIT
-0.3 to +18
18
(GND -0.3) to (V+) +0.3
-0.3 to (V+) +0.3
or 30 mA, whichever occurs first
30
100
-65 to +125
-65 to +150
450
650
900
2500
UNIT
V
mA
°C
mW
V
Latch Up Current, per JESD78D
400
mA
Notes
a. Signals on S_X, D_X, or IN_X exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads welded or soldered to PC board.
c. Derate 7 mW/°C above 75 °C.
d. Derate 7.6 mW/°C above 75 °C
e. Derate 12 mW/°C above 75 °C.

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
S16-0391-Rev. A, 07-Mar-16
2
Document Number: 78091
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000