DG411LE Datasheet, PDF (1/17 Pages) Vishay Siliconix – Low Parasitic Capacitance and Leakage, Quad SPST Switches

www.vishay.com
DG411LE, DG412LE, DG413LE
Vishay Siliconix
16 , Low Parasitic Capacitance and Leakage,
+12 V / +5 V / +3 V / ± 5 V Quad SPST Switches
DESCRIPTION
The DG411LE, DG412LE, and DG413LE are monolithic
quad single-pole-single-throw analog switches. The
DG411LE and DG412LE differ only in that they respond to
opposite logic levels. The DG413LE has two normally open
and two normally closed switches. It can be given various
configurations, including four SPST, two SPDT, and one
DPDT.
The DG411LE, DG412LE, and DG413LE offer low on
resistance of 16 , low parasitic capacitance of 15 pF
switch on capacitance, and low charge injection over the
signal swing range.
The DG411LE, DG412LE, and DG413LE operate on single
and dual supplies. Single supply voltage ranges from 3 V
to 16 V while dual supply operation is recommended with
± 3 V to ± 8 V. Each switch conducts equally well in both
direction when on, and blocks input voltages up to the
supply levels when off.
The DG411LE, DG412LE, and DG413LE are available in
16 lead TSSOP, SOIC, and PDIP packages.
FEATURES
• 3 V to 16 V single supply or ± 3 V to ± 8 V dual
supply
• On-resistance R_DS(on): 16 
Available
• Low parasitic capacitance:
Available
C_D(ON): 15 pF
C_S(OFF): 5 pF
• Less than 8 pC charge injection over the full signal swing
range
• Fast switching t_ON: 16 ns
t_OFF: 9 ns
• TTL, CMOS compatible
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
BENEFITS
• Wide operation voltage range
• Low signal errors and distortion
• Fast switching time
• Minimized switching glitch
APPLICATIONS
• Automatic test equipment
• Data acquisition systems
• Meters and instruments
• Medical and healthcare systems
• Communication systems
• Audio and video signal routing
• Relay replacement
• Battery powered systems
• Computer peripherals
• Audio and video signal routing
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
DG411LE, DG412LE
Dual-In-Line, TSSOP and SOIC
DG413LE
Dual-In-Line, TSSOP and SOIC
IN₁ 1
D₁ 2
S_{1 3}
V- 4
GND 5
S₄ 6
D₄ 7
IN₄ 8
Top View
16 IN2
15 D2
14 S2
13 V+
12 V_L
11 S3
10 D₃
9 IN₃
IN₁ 1
D₁ 2
S₁ 3
V- 4
GND 5
S₄ 6
D₄ 7
IN₄ 8
Top View
16 IN₂
15 D2
14 S₂
13 V+
12 V_L
11 S₃
10 D₃
9 IN₃
S16-0391-Rev. A, 07-Mar-16
1
Document Number: 78091
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000