VS-FC220SA20 Datasheet, PDF (1/10 Pages) Vishay Siliconix – Easy to use and parallel

www.vishay.com
VS-FC220SA20
Vishay Semiconductors
SOT-227 Power Module
Single Switch - Power MOSFET, 220 A
SOT-227
PRODUCT SUMMARY
V_DSS
R_DS(on)
I_D
Type
Package
200 V
0.0048 
220 A
Modules - MOSFET
SOT-227
FEATURES
• Enhanced body diode dV/dt and dI_F/dt capability
• Improved gate avalanche and dynamic dV/dt
ruggedness
• Fully characterized capacitance and avalanche SOA
• Fully isolated package
• Easy to use and parallel
• Low on-resistance
• Simple drive requirements
• UL approved file E78996
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• High efficiency synchronous rectification SMPS
• Uninterruptible power supply
• High speed power switching
• Hard switched and high frequency circuits
DESCRIPTION
This generation of power MOSFETs from Vishay
Semiconductors provide the designer with the best
combination of fast switching, ruggedized device design,
low on-resistance and cost-effectiveness.
The SOT-227 package is universally preferred for all
commercial-industrial applications at power dissipation
levels to approximately 400 W to 700 W. The low thermal
resistance of the SOT-227 contribute to its wide acceptance
throughout the industry.
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
TEST CONDITIONS
MAX.
UNITS
MOSFET
Drain to source voltage
Continuous drain current at V_GS 10 V
Pulsed drain current
Power dissipation
Gate to source voltage
Single pulse avalanche energy
Avalanche current
Repetitive avalanche energy
MODULE
V_DSS
I_D ⁽¹⁾
I_DM ⁽²⁾
P_D
V_GS
E_AS ⁽³⁾
I_AR ⁽⁴⁾
E_AR ⁽⁴⁾
T_C = 25 °C
T_C = 100 °C
T_C = 25 °C
T_C = 100 °C
200
V
220
158
A
520
789
W
395
± 30
V
1200
mJ
70
A
600
mJ
Operating junction temperature range
Operating storage temperature range
Insulation withstand voltage (AC-RMS)
T_J
T_Stg
V_ISOL
-55 to +175
°C
-55 to +175
2.5
kV
Notes
(1) _{Maximum continuous drain current at VGS 10 V must be limited to 100 A to do not exceed the maximum temperature of power terminals.}
(2) _{Repetitive rating; pulse width limited by maximum junction temperature.}
(3) _{Limited by TJ max., starting TJ = 25 °C, L = 0.23 mH, Rg = 25 , IAS = 102 A, VGS = 10 V. Part not recommended for use above this value.}
(4) _{Repetitive rating; pulse width limited by maximum junction temperature starting TJ = 25 °C, L = 0.23 mH, Rg = 25 , VGS = 10 V, duty cycle 1 %.}
Revision: 01-Jun16
1
Document Number: 94846
For technical questions within your region: [e-mail], [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000