English
Language : 

SI8809EDB Datasheet, PDF (1/8 Pages) Vishay Siliconix – P-Channel 20 V (D-S) MOSFET
www.vishay.com
Si8809EDB
Vishay Siliconix
P-Channel 20 V (D-S) MOSFET
PRODUCT SUMMARY
VDS (V)
-20
RDS(on) (Ω)
0.090 at VGS = -4.5 V
0.119 at VGS = -2.5 V
0.155 at VGS = -1.8 V
ID (A) a
-2.6
-2.3
-2
Qg (TYP.)
6 nC
MICRO FOOT® 0.8 x 0.8
S
S
2
xxxxx
3
1 0.8 mm
1
4G
D
Backside View
Bump Side View
Marking Code: xx = AE
xxx = Date/Lot traceability code
Ordering Information:
Si8809EDB-T2-E1 (lead (Pb)-free and halogen-free)
FEATURES
• TrenchFET® power MOSFET
• Ultra small 0.8 mm x 0.8 mm outline
• Ultra thin 0.357 mm height
• Typical ESD protection 1000 V HBM
• High speed switching
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
S
• Portable devices such as cell phones,
smart phones, tablet PCs and media
players
- Load switch
- Battery switch
G
D
P-Channel MOSFET
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted)
PARAMETER
SYMBOL
Drain-Source Voltage
Gate-Source Voltage
Continuous Drain Current (TJ = 150 °C)
Pulsed Drain Current (t = 300 μs)
TA = 25 °C
TA = 70 °C
TA = 25 °C
TA = 70 °C
Continuous Source-Drain Diode Current
TA = 25 °C
TA = 25 °C
TA = 25 °C
Maximum Power Dissipation
TA = 70 °C
TA = 25 °C
TA = 70 °C
Operating Junction and Storage Temperature Range
Soldering Recommendations (Peak Temperature) c
VDS
VGS
ID
IDM
IS
PD
TJ, Tstg
LIMIT
-20
±8
-2.6 a
-2.1 a
-1.9 b
-1.5 b
-13
-0.7 a
-0.4 b
0.9 a
0.6 a
0.5 b
0.3 b
-55 to +150
260
UNIT
V
A
W
°C
THERMAL RESISTANCE RATINGS
PARAMETER
SYMBOL
Maximum Junction-to-Ambient a, d
Maximum Junction-to-Ambient b, e
t≤5s
RthJA
Notes
a. Surface mounted on 1" x 1" FR4 board with full copper, t = 5 s.
b. Surface mounted on 1" x 1" FR4 board with minimum copper, t = 5 s.
c. Refer to IPC/JEDEC® (J-STD-020), no manual or hand soldering.
d. Maximum under steady state conditions is 185 °C/W.
e. Maximum under steady state conditions is 330 °C/W.
TYPICAL
105
200
MAXIMUM
135
260
UNIT
°C/W
S15-0346-Rev. C, 23-Feb-15
1
Document Number: 63301
For technical questions, contact: pmostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000