TGS2354_15 Datasheet, PDF (7/11 Pages) TriQuint Semiconductor – 0.5-6.0 GHz 40 Watt GaN Switch

Application Circuit
TGS2354
0.5-6.0 GHz 40 Watt GaN Switch
Notes:
DC blocking capacitors are required on all RF ports.
VC1 can be biased from either bond pad 2 or 7, and the non-biased bond pad can be left open.
VC2 can be biased from either bond pad 3 or 6, and the non-biased bond pad can be left open.
This switch can be configured as a Single Pole, Single Throw (SPST) by terminating one unused
RF switched port with a 50 Ohm load.
Function Table
RF Path
RFC to RF1
RFC to RF2
State
On-State (Insertion Loss)
Off-State (Isolation)
On-State (Insertion Loss)
Off-State (Isolation)
VC1
0V
-40 V
-40 V
0V
VC2
-40 V
0V
0V
-40 V
Datasheet: Rev - 07-23-14
© 2014 TriQuint
- 7 of 11 -
Disclaimer: Subject to change without notice
www.triquint.com