AP561-F_15 Datasheet, PDF (16/17 Pages) TriQuint Semiconductor – 0.7-2.9 GHz 8W HBT Power Amplifier

Mechanical Information
Package Marking and Dimensions
Marking: Part number – AP561-F
Lot code – XXXX
AP561-F
0.7-2.9 GHz 8W HBT Power Amplifier
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. Except where noted, this part outline conforms to JEDEC standard MO-220, Issue E (Variation VGGC) for thermally enhanced
plastic very thin fine pitch quad flat no lead package (QFN).
3. Dimension and tolerance formats conform to ASME Y14.4M-1994.
4. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012.
PCB Mounting Pattern
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. Use 1 oz. copper minimum for top and bottom layer metal.
3. Vias are required under the backside paddle of this device for proper RF/DC grounding and thermal dissipation. We
recommend a 0.35mm (#80/.0135") diameter bit for drilling via holes and a final plated thru diameter of 0.25 mm (0.10”).
4. Ensure good package backside paddle solder attach for reliable operation and best electrical performance.
Datasheet: Rev B 09-17-13
© 2013 TriQuint
- 16 of 17 -
Disclaimer: Subject to change without notice
www.triquint.com