AP561-F_15 Datasheet, PDF (13/17 Pages) TriQuint Semiconductor – 0.7-2.9 GHz 8W HBT Power Amplifier

AP561-F
0.7-2.9 GHz 8W HBT Power Amplifier
Parameter Measurement Information: Switching Speed Test
Test Conditions:
V_cc = +12V at 25°C
Output Power = +30dBm at 2.5 GHz
Rep Rate = 1 KHz, 50% duty cycle
Vpd amplitude = +5V
R2 = 200Ω, C9 = 12pF
(C10, C11 removed for best switching
performance)
Xtal Detector Voltage =15mV (square law)
Cable Length = Lx
Pulse Generator ^-ve
+ve
Oscilloscope
CW Signal Source
Cable Length = Lx
Vpd
AP56x Evaluation Brd
Cable Length = Lx
Diode Detector
Attenuator
Test Result Waveforms:
Vpd = 5V
Vpd = 0V
RF On
Vpd = 5V
RF Off
Delay = 50nS
Vpd = 5V
RF On
Delay = 50nS
Datasheet: Rev B 09-17-13
© 2013 TriQuint
- 13 of 17 -
Disclaimer: Subject to change without notice
www.triquint.com