DS92LX1621 Datasheet, PDF (9/44 Pages) National Semiconductor (TI) – 10 - 50 MHz Channel Link III Serializer and Deserializer with Embedded Bi-Directional Control Channel

Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Supply Voltage ( V_DD1V8)
Supply Voltage (V_DD3V3)
LVCMOS Input Voltage (V_DD1V8)
LVCMOS Input Voltage (V_DD3V3)
LVCMOS Output Voltage (V_DD)
CML Driver I/O Voltage (V_DD1V8)
CML Receiver I/O Voltage
(V_DD1V8)
Junction Temperature
Storage Temperature
Maximum Package Power
Dissipation Capacity
Package Derating:
DS92LX1621 32L LLP
 θ_JA (based on 9 thermal vias)
 θ_JC (based on 9 thermal vias)
Maximum Package Power
Dissipation Capacity Package
Package Derating:
DS92LX1622 40L LLP
 θ_JA(based on 16 thermal vias)
−0.3V to +2.5V
−0.3V to +4.0V
−0.3V to +(V_DD1V8 + 0.3V)
−0.3V to +(V_DD3V3 + 0.3V)
−0.3V to +(V_DD + 0.3V)
−0.3V to (V_DD1V8 + 0.3V)
−0.3V to (V_DD1V8 + 0.3V)
+150°C
−65°C to +150°C
1/θJA °C/W above +25°
34.3 °C/W
6.9 °C/W
1/θ_JA °C/W above +25°
28.0 °C/W
 θ_JC(based on 16 thermal vias)
ESD Rating (IEC 61000–4–2)
Air Discharge
(DOUT+, DOUT-, RIN+,
RIN-)
Contact Discharge
(DOUT+, DOUT-, RIN+,
RIN-)
ESD Rating (HBM)
4.4 °C/W
RD = 330Ω, CS = 150pF
≥±25 kV
≥±10 kV
≥±8 kV
Recommended Operating
Conditions
V_DD (1.8V)
V_DDIO (1.8V Mode)
V_DDIO (3.3V Mode)
Supply Noise
V_DDn(1.8V)
V_DDIO(1.8V)
V_DD3V3
Operating Free Air
Temperature (T_A)
Input Clock Rate
Min
1.71
1.71
3
-40
10
Nom Max
1.8 1.89
1.8 1.89
3.3 3.6
25
25
50
25
85
50
Units
V
V
V
mVp-p
mVp-p
mVp-p
°C
MHz
Serializer Electrical Characteristics (Note 2, Note 3, Note 4)
Over recommended operating supply and temperature ranges unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ
Max
LVCMOS DC SPECIFICATIONS 3.3V I/O (SER INPUTS, DES OUTPUTS, GPIO, CONTROL INPUTS AND OUTPUTS)
V_IH
High Level Input Voltage
VIN = 3.0V to 3.6V
V_IL
Low Level Input Voltage
VIN = 3.0V to 3.6V
I_IN
Input Current
VIN = 0V or 3.6V
VIN = 3.0V to 3.6V
2.0
V_IN
GND
0.8
-20
±1
+20
V_OH
High Level Output Voltage V_DDIO = 3.0V to 3.6V
2.4
V_DDIO
V_OL
Low Level Output Voltage V_DDIO = 3.0V to 3.6V
I_OH = +4mA
GND
0.4
I_OS
Output Short Circuit Current V_OUT = 0V
Serializer GPIO
-24
Outputs
Deserializer
LVCMOS
-39
Outputs
PDB = 0V,
I_OZ
TRI-STATE® Output Current _{VOUT = 0V or VDD}
LVCMOS
Outputs
-20
±1
+20
LVCMOS DC SPECIFICATIONS 1.8V I/O (TX INPUTS, RX OUTPUTS, GPIO, CONTROL INPUTS AND OUTPUTS)
V_IH
High Level Input Voltage
V_IN = 1.71V to 1.89V
V_IL
Low Level Input Voltage
V_IN = 1.71V to 1.89V
I_IN
Input Current
V_IN = 0V or 1.89V
V_IN = 1.71V to 1.89V
V_OH
High Level Output Voltage V_DDIO = 1.71V to 1.89V
I_OH = −4mA
V_OL
Low Level Output Voltage V_DDIO = 1.71V to 1.89V
I_OL = +4 mA
0.65 V_IN
GND
V_IN +0.3
0.35 V_IN
-20
±1
+20
V_DDIO -
0.45
V_DDIO
GND
0.45
Units
V
V
µA
V
V
mA
µA
V
µA
V
V
www.national.com
8