LM3S9D96 Datasheet, PDF (896/1407 Pages) Texas Instruments – ARM and Thumb are registered trademarks and Cortex is a trademark

Controller Area Network (CAN) Module
Bit/Field
5
4
3
Name
EPASS
RXOK
TXOK
Type
RO
R/W
R/W
Reset
0
Description
Error Passive
Value
0
1
Description
The CAN module is in the Error Active state, that is, the
receive or transmit error count is less than or equal to 127.
The CAN module is in the Error Passive state, that is, the
receive or transmit error count is greater than 127.
0
Received a Message Successfully
Value
0
1
Description
Since this bit was last cleared, no message has been
successfully received.
Since this bit was last cleared, a message has been
successfully received, independent of the result of the
acceptance filtering.
This bit must be cleared by writing a 0 to it.
0
Transmitted a Message Successfully
Value
0
1
Description
Since this bit was last cleared, no message has been
successfully transmitted.
Since this bit was last cleared, a message has been
successfully transmitted error-free and acknowledged by
at least one other node.
This bit must be cleared by writing a 0 to it.
896
January 23, 2012
Texas Instruments-Production Data