OMAP-L138_11 Datasheet, PDF (82/287 Pages) Texas Instruments – OMAP-L138 C6-Integra DSP+ARM Processor

OMAP-L138
SPRS586C – JUNE 2009 – REVISED MAY 2011
www.ti.com
4.4 Electrical Characteristics Over Recommended Ranges of Supply Voltage and
Operating Junction Temperature (Unless Otherwise Noted)
V_OH
V_OL
I_I ⁽²⁾
I_OH
I_OL
Capacitance
PARAMETER
TEST CONDITIONS
MIN
TYP
High-level output voltage
(dual-voltage LVCMOS IOs at 3.3V)⁽¹⁾
High-level output voltage
(dual-voltage LVCMOS IOs at 1.8V)⁽¹⁾
DVDD= 3.15V, I_OH = -4 mA
DVDD= 3.15V, I_OH = -100 μA
DVDD= 1.71V, I_OH = -2 mA
2.4
2.95
DVDD-0.45
Low-level output voltage
(dual-voltage LVCMOS I/Os at 3.3V)
Low-level output voltage
(dual-voltage LVCMOS I/Os at 1.8V)
DVDD= 3.15V, I_OL = 4mA
DVDD= 3.15V, I_OL = 100 μA
DVDD= 1.71V, I_OL = 2mA
V_I = VSS to DVDD without
opposing internal resistor
Input current⁽¹⁾
(dual-voltage LVCMOS I/Os)
V_I = VSS to DVDD with
opposing internal pullup
70
resistor ⁽³⁾
V_I = VSS to DVDD with
opposing internal pulldown
-75
resistor ⁽³⁾
Input current (DDR2/mDDR I/Os)
High-level output current⁽¹⁾
(dual-voltage LVCMOS I/Os)
V_I = VSS to DVDD with
opposing internal pulldown
-77
resistor ⁽³⁾
Low-level output current⁽¹⁾
(dual-voltage LVCMOS I/Os)
Input capacitance (dual-voltage LVCMOS)
3
Output capacitance (dual-voltage LVCMOS)
3
MAX
0.4
0.2
0.45
±9
310
UNIT
V
V
V
V
V
V
μA
μA
-270
μA
-286
μA
-6
mA
6
mA
pF
pF
(1) These IO specifications apply to the dual-voltage IOs only and do not apply to DDR2/mDDR or SATA interfaces. DDR2/mDDR IOs are
1.8V IOs and adhere to the JESD79-2A standard. USB0 I/Os adhere to the USB2.0 standard. USB1 I/Os adhere to the USB1.1
standard. SATA I/Os adhere to the SATA-I and SATA-II standards.
(2) I_I applies to input-only pins and bi-directional pins. For input-only pins, I_I indicates the input leakage current. For bi-directional pins, I_I
indicates the input leakage current and off-state (Hi-Z) output leakage current.
(3) Applies only to pins with an internal pullup (IPU) or pulldown (IPD) resistor. The pull-up and pull-down strengths shown represent the
minimum and maximum strength across process variation.
82
Device Operating Conditions
Submit Documentation Feedback
Product Folder Link(s): OMAP-L138
Copyright © 2009–2011, Texas Instruments Incorporated