English
Language : 

OMAP-L138_11 Datasheet, PDF (201/287 Pages) Texas Instruments – OMAP-L138 C6-Integra DSP+ARM Processor
OMAP-L138
www.ti.com
SPRS586C – JUNE 2009 – REVISED MAY 2011
Table 5-92. Universal Serial Bus OTG (USB0) Registers (continued)
BYTE ADDRESS
0x01E0 0520
0x01E0 0522
0x01E0 0524
0x01E0 0526
0x01E0 0528
0x01E0 052A
0x01E0 052B
0x01E0 052C
0x01E0 052D
0x01E0 0530
0x01E0 0532
0x01E0 0534
0x01E0 0536
0x01E0 0538
0x01E0 053A
0x01E0 053B
0x01E0 053C
0x01E0 053D
0x01E0 0540
0x01E0 0542
0x01E0 0544
0x01E0 0546
0x01E0 0548
0x01E0 054A
0x01E0 054B
0x01E0 054C
0x01E0 054D
0x01E0 1000
0x01E0 1004
0x01E0 1008
ACRONYM
REGISTER DESCRIPTION
TXMAXP
Maximum Packet Size for Peripheral/Host Transmit Endpoint
PERI_TXCSR
Control Status Register for Peripheral Transmit Endpoint (peripheral mode)
HOST_TXCSR
Control Status Register for Host Transmit Endpoint (host mode)
RXMAXP
Maximum Packet Size for Peripheral/Host Receive Endpoint
PERI_RXCSR
Control Status Register for Peripheral Receive Endpoint (peripheral mode)
HOST_RXCSR
Control Status Register for Host Receive Endpoint (host mode)
RXCOUNT
Number of Bytes in Host Receive endpoint FIFO
HOST_TXTYPE
Sets the operating speed, transaction protocol and peripheral endpoint number for
the host Transmit endpoint.
HOST_TXINTERVAL Sets the polling interval for Interrupt/ISOC transactions or the NAK response
timeout on Bulk transactions for host Transmit endpoint.
HOST_RXTYPE
Sets the operating speed, transaction protocol and peripheral endpoint number for
the host Receive endpoint.
HOST_RXINTERVAL Sets the polling interval for Interrupt/ISOC transactions or the NAK response
timeout on Bulk transactions for host Receive endpoint.
Control and Status Register for Endpoint 3
TXMAXP
Maximum Packet Size for Peripheral/Host Transmit Endpoint
PERI_TXCSR
Control Status Register for Peripheral Transmit Endpoint (peripheral mode)
HOST_TXCSR
Control Status Register for Host Transmit Endpoint (host mode)
RXMAXP
Maximum Packet Size for Peripheral/Host Receive Endpoint
PERI_RXCSR
Control Status Register for Peripheral Receive Endpoint (peripheral mode)
HOST_RXCSR
Control Status Register for Host Receive Endpoint (host mode)
RXCOUNT
Number of Bytes in Host Receive endpoint FIFO
HOST_TXTYPE
Sets the operating speed, transaction protocol and peripheral endpoint number for
the host Transmit endpoint.
HOST_TXINTERVAL Sets the polling interval for Interrupt/ISOC transactions or the NAK response
timeout on Bulk transactions for host Transmit endpoint.
HOST_RXTYPE
Sets the operating speed, transaction protocol and peripheral endpoint number for
the host Receive endpoint.
HOST_RXINTERVAL Sets the polling interval for Interrupt/ISOC transactions or the NAK response
timeout on Bulk transactions for host Receive endpoint.
Control and Status Register for Endpoint 4
TXMAXP
Maximum Packet Size for Peripheral/Host Transmit Endpoint
PERI_TXCSR
Control Status Register for Peripheral Transmit Endpoint (peripheral mode)
HOST_TXCSR
Control Status Register for Host Transmit Endpoint (host mode)
RXMAXP
Maximum Packet Size for Peripheral/Host Receive Endpoint
PERI_RXCSR
Control Status Register for Peripheral Receive Endpoint (peripheral mode)
HOST_RXCSR
Control Status Register for Host Receive Endpoint (host mode)
RXCOUNT
Number of Bytes in Host Receive endpoint FIFO
HOST_TXTYPE
Sets the operating speed, transaction protocol and peripheral endpoint number for
the host Transmit endpoint.
HOST_TXINTERVAL Sets the polling interval for Interrupt/ISOC transactions or the NAK response
timeout on Bulk transactions for host Transmit endpoint.
HOST_RXTYPE
Sets the operating speed, transaction protocol and peripheral endpoint number for
the host Receive endpoint.
HOST_RXINTERVAL Sets the polling interval for Interrupt/ISOC transactions or the NAK response
timeout on Bulk transactions for host Receive endpoint.
DMA Registers
DMAREVID
DMA Revision Register
TDFDQ
DMA Teardown Free Descriptor Queue Control Register
DMAEMU
DMA Emulation Control Register
Copyright © 2009–2011, Texas Instruments Incorporated
Peripheral Information and Electrical Specifications 201
Submit Documentation Feedback
Product Folder Link(s): OMAP-L138