LM4F111C4QR Datasheet, PDF (711/1113 Pages) Texas Instruments – Microcontroller

Stellaris^® LM4F111C4QR Microcontroller
Bit/Field
2
1
0
Name
INTTYPE
RESEN
INTEN
Type
R/W
R/W
R/W
Reset
0
Description
Watchdog Interrupt Type
The INTTYPE values are defined as follows:
Value Description
0 Watchdog interrupt is a standard interrupt.
1 Watchdog interrupt is a non-maskable interrupt.
0
Watchdog Reset Enable
The RESEN values are defined as follows:
Value Description
0 Disabled.
1 Enable the Watchdog module reset output.
0
Watchdog Interrupt Enable
The INTEN values are defined as follows:
Value Description
0 Interrupt event disabled (once this bit is set, it can only be
cleared by a hardware reset).
1 Interrupt event enabled. Once enabled, all writes are ignored.
April 25, 2012
711
Texas Instruments-Advance Information