AMC1304L05-Q1 Datasheet, PDF (7/39 Pages) Texas Instruments – High-Precision, Reinforced Isolated Delta-Sigma Modulators with LDO

www.ti.com
AMC1304L05-Q1, AMC1304L25-Q1, AMC1304M05-Q1, AMC1304M25-Q1
SBAS799 – FEBRUARY 2017
7.7 Safety-Related Certifications
VDE
Certified according to DIN V VDE V 0884-10 (VDE V 0884-10):
2006-12, DIN EN 60950-1 (VDE 0805 Teil 1): 2014-08, and DIN EN
60095 (VDE 0860): 2005-11
Reinforced insulation
File number: 40040142
UL
Recognized under UL1577 component recognition and CSA
component acceptance NO 5 programs
Single protection
File number: E181974
7.8 Safety Limiting Values
Safety limiting intends to prevent potential damage to the isolation barrier upon failure of input or output (I/O) circuitry. A
failure of the I/O circuitry may allow low resistance to ground or the supply and, without current limiting, dissipate sufficient
power to overheat the die and damage the isolation barrier, potentially leading to secondary system failures.
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNIT
I_S
Safety input, output, or supply current
θ_JA = 80.2°C/W, LDOIN = 18 V, T_J = 150°C,
T_A = 25°C, see Figure 3
P_S Safety input, output, or total power
θ_JA = 80.2°C/W, T_J = 150°C, T_A = 25°C, see Figure 4
T_S Maximum safety temperature
86.5 mA
1558⁽¹⁾ mW
150 °C
(1) Input, output, or the sum of input and output power must not exceed this value.
The maximum safety temperature is the maximum junction temperature specified for the device. The power
dissipation and junction-to-air thermal impedance of the device installed in the application hardware determines
the junction temperature. The assumed junction-to-air thermal resistance in the Thermal Information table is that
of a device installed on a high-K test board for leaded surface-mount packages. The power is the recommended
maximum input voltage times the current. The junction temperature is then the ambient temperature plus the
power times the junction-to-air thermal resistance.
Copyright © 2017, Texas Instruments Incorporated
Submit Documentation Feedback
7
Product Folder Links: AMC1304L05-Q1 AMC1304L25-Q1 AMC1304M05-Q1 AMC1304M25-Q1