AMC1304L05-Q1 Datasheet, PDF (24/39 Pages) Texas Instruments – High-Precision, Reinforced Isolated Delta-Sigma Modulators with LDO

AMC1304L05-Q1, AMC1304L25-Q1, AMC1304M05-Q1, AMC1304M25-Q1
SBAS799 – FEBRUARY 2017
www.ti.com
8.4 Device Functional Modes
8.4.1 Fail-Safe Output
In the case of a missing high-side supply voltage (LDOIN), the output of a ΔΣ modulator is not defined and can
cause a system malfunction. In systems with high safety requirements, this behavior is not acceptable.
Therefore, the AMC1304-Q1 implements a fail-safe output function that ensures the device maintains its output
level in case of a missing LDOIN, as shown in Figure 51.
CLKIN
LDOIN
LDOIN GOOD
LDOIN FAIL
DOUT
DOUT
Figure 51. Fail-Safe Output of the AMC1304-Q1
8.4.2 Output Behavior in Case of a Full-Scale Input
If a full-scale input signal is applied to the AMC1304-Q1 (that is, V_IN ≥ V_Clipping), the device generates a single
one or zero every 128 bits at DOUT, depending on the actual polarity of the signal being sensed, as shown in
Figure 52. In this way, differentiating between a missing LDOIN and a full-scale input signal is possible on the
system level.
CLKIN
DOUT
DOUT
...
...
VIN ” -312.5 mV (AMC1304x05-Q1: -61.5 mV)
...
...
...
...
VIN • 312.5 mV (AMC1304x05-Q1: 61.5 mV)
127 CLKIN cycles
127 CLKIN cycles
Copyright © 2016, Texas Instruments Incorporated
Figure 52. Overrange Output of the AMC1304-Q1
24
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
Product Folder Links: AMC1304L05-Q1 AMC1304L25-Q1 AMC1304M05-Q1 AMC1304M25-Q1