AM1802 Datasheet, PDF (66/180 Pages) Texas Instruments – AM1802 ARM Microprocessor

AM1802
SPRS710C – NOVEMBER 2010 – REVISED MARCH 2012
PSC0 BYTE
ADDRESS
-
-
-
Table 5-8. Power and Sleep Controller (PSC) Registers (continued)
PSC1 BYTE
ADDRESS
0x01E2 7A74
0x01E2 7A78
0x01E2 7A7C
ACRONYM
MDCTL29
MDCTL30
MDCTL31
REGISTER DESCRIPTION
Module 29 Control Register
Module 30 Control Register
Module 31 Control Register
www.ti.com
5.8.1 Power Domain and Module Topology
The device includes two PSC modules.
Each PSC module controls clock states for several of the on chip modules, controllers and interconnect
components. Table 5-9 and Table 5-10 lists the set of peripherals/modules that are controlled by the PSC,
the power domain they are associated with, the LPSC assignment and the default (power-on reset)
module states. See the device-specific data manual for the peripherals available on a given device. The
module states and terminology are defined in Section 5.8.1.1.
Table 5-9. PSC0 Default Module Configuration
LPSC Module Name
Number
0
EDMA3 Channel Controller 0
1
EDMA3 Transfer Controller 0
2
EDMA3 Transfer Controller 1
3
EMIFA (Br7)
4
SPI 0
5
MMC/SD 0
6
ARM Interrupt Controller
7
ARM RAM/ROM
8
—
9
UART 0
10 SCR0 (Br 0, Br 1, Br 2, Br 8)
11 SCR1 (Br 4)
12 SCR2 (Br 3, Br 5, Br 6)
13 —
14 ARM
15 —
Power Domain
AlwaysON (PD0)
AlwaysON (PD0)
AlwaysON (PD0)
AlwaysON (PD0)
AlwaysON (PD0)
AlwaysON (PD0)
AlwaysON (PD0)
AlwaysON (PD0)
—
AlwaysON (PD0)
AlwaysON (PD0)
AlwaysON (PD0)
AlwaysON (PD0)
—
AlwaysON (PD0)
—
Default Module State
SwRstDisable
SwRstDisable
SwRstDisable
SwRstDisable
SwRstDisable
SwRstDisable
SwRstDisable
Enable
—
SwRstDisable
Enable
Enable
Enable
—
SwRstDisable
—
Auto Sleep/Wake Only
—
—
—
—
—
—
—
Yes
—
—
Yes
Yes
Yes
—
—
—
66
Peripheral Information and Electrical Specifications
Copyright © 2010–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): AM1802