MSP430F5438A Datasheet, PDF (65/106 Pages) Texas Instruments – Mixed Signal Microcontroller

MSP430F5438A, MSP430F5437A, MSP430F5436A, MSP430F5435A
MSP430F5419A, MSP430F5418A
www.ti.com
SLAS655D – JANUARY 2010 – REVISED AUGUST 2013
REF, External Reference
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)⁽¹⁾
V_eREF+
PARAMETER
Positive external reference
voltage input
TEST CONDITIONS
V_eREF+ > V_REF–/V_eREF– ⁽²⁾
V_CC
MIN TYP
1.4
V_REF–/V_eREF–
Negative external reference
voltage input
V_eREF+ > V_REF–/V_eREF– ⁽³⁾
0
(V_eREF+ –
V_REF–/V_eREF–)
Differential external reference
voltage input
I_VeREF+,
I_{VREF–/VeREF–}
Static input current
V_eREF+ > V_REF–/V_eREF– ⁽⁴⁾
1.4 V ≤ V_eREF+ ≤ V_AVCC,
V_eREF– = 0 V, f_ADC12CLK = 5 MHz,
ADC12SHTx = 1h,
Conversion rate 200 ksps
1.4 V ≤ V_eREF+ ≤ V_AVCC,
V_eREF– = 0 V, f_ADC12CLK = 5 MHz,
ADC12SHTx = 8h,
Conversion rate 20 ksps
1.4
2.2 V, 3 V
-26
2.2 V, 3 V
-1
C_VREF+/-
Capacitance at VREF+ and
VREF- terminals
(5)₁₀
MAX UNIT
AV_CC V
1.2 V
AV_CC V
26 µA
1 µA
µF
(1) The external reference is used during ADC conversion to charge and discharge the capacitance array. The input capacitance, C_i, is also
the dynamic load for an external reference during conversion. The dynamic impedance of the reference supply should follow the
recommendations on analog-source impedance to allow the charge to settle for 12-bit accuracy.
(2) The accuracy limits the minimum positive external reference voltage. Lower reference voltage levels may be applied with reduced
accuracy requirements.
(3) The accuracy limits the maximum negative external reference voltage. Higher reference voltage levels may be applied with reduced
accuracy requirements.
(4) The accuracy limits minimum external differential reference voltage. Lower differential reference voltage levels may be applied with
reduced accuracy requirements.
(5) Two decoupling capacitors, 10 µF and 100 nF, should be connected to VREF to decouple the dynamic current required for an external
reference source if it is used for the ADC12_A. See also the MSP430x5xx and MSP430x6xx Family User's Guide (SLAU208).
REF, Built-In Reference
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)⁽¹⁾
PARAMETER
V_REF+
Positive built-in reference
voltage output
AV_CC(min)
AV_CC minimum voltage,
Positive built-in reference
active
TEST CONDITIONS
REFVSEL = {2} for 2.5 V,
REFON = REFOUT = 1, I_VREF+= 0 A
REFVSEL = {1} for 2.0 V,
REFON = REFOUT = 1, I_VREF+= 0 A
REFVSEL = {0} for 1.5 V,
REFON = REFOUT = 1, I_VREF+= 0 A
REFVSEL = {0} for 1.5 V
REFVSEL = {1} for 2.0 V
REFVSEL = {2} for 2.5 V
V_CC
3V
3V
2.2 V, 3 V
MIN TYP
2.50
1.98
1.49
2.2
2.3
2.8
ADC12SR = 1, REFON = 1, REFOUT = 0,
REFBURST = 0
3V
70
I_REF+
Operating supply current into
AVCC terminal^{(2) (3)}
ADC12SR = 1, REFON = 1, REFOUT = 1,
REFBURST = 0
ADC12SR = 0, REFON = 1, REFOUT = 0,
REFBURST = 0
3V
3V
0.45
210
ADC12SR = 0, REFON = 1, REFOUT = 1,
REFBURST = 0
3V
0.95
MAX
±1.5%
±1.5%
±1.5%
100
0.75
310
1.7
UNIT
V
V
µA
mA
µA
mA
(1) The reference is supplied to the ADC by the REF module and is buffered locally inside the ADC. The ADC uses two internal buffers, one
smaller and one larger for driving the V_REF+ terminal. When REFOUT = 1, the reference is available at the V_REF+ terminal, as well as,
used as the reference for the conversion and utilizes the larger buffer. When REFOUT = 0, the reference is only used as the reference
for the conversion and utilizes the smaller buffer.
(2) The internal reference current is supplied via terminal AV_CC. Consumption is independent of the ADC12ON control bit, unless a
conversion is active. REFOUT = 0 represents the current contribution of the smaller buffer. REFOUT = 1 represents the current
contribution of the larger buffer without external load.
(3) The temperature sensor is provided by the REF module. Its current is supplied via terminal AV_CC and is equivalent to I_REF+ with REFON
=1 and REFOUT = 0.
Copyright © 2010–2013, Texas Instruments Incorporated
Submit Documentation Feedback
65
Product Folder Links: MSP430F5438A MSP430F5437A MSP430F5436A MSP430F5435A MSP430F5419A
MSP430F5418A