MSP430F5438A Datasheet, PDF (54/106 Pages) Texas Instruments – Mixed Signal Microcontroller

MSP430F5438A, MSP430F5437A, MSP430F5436A, MSP430F5435A
MSP430F5419A, MSP430F5418A
SLAS655D – JANUARY 2010 – REVISED AUGUST 2013
www.ti.com
PMM, SVS High Side
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNIT
I_(SVSH)
SVS current consumption
SVSHE = 0, DV_CC = 3.6 V
SVSHE = 1, DV_CC = 3.6 V, SVSHFP = 0
SVSHE = 1, DV_CC = 3.6 V, SVSHFP = 1
SVSHE = 1, SVSHRVL = 0
0
nA
200
nA
1.5
µA
1.57 1.68 1.78
V_{(SVSH_IT–)}
SVS_H on voltage level⁽¹⁾
SVSHE = 1, SVSHRVL = 1
SVSHE = 1, SVSHRVL = 2
1.79 1.88 1.98
V
1.98 2.08 2.21
SVSHE = 1, SVSHRVL = 3
2.10 2.18 2.31
SVSHE = 1, SVSMHRRL = 0
1.62 1.74 1.85
SVSHE = 1, SVSMHRRL = 1
1.88 1.94 2.07
SVSHE = 1, SVSMHRRL = 2
2.07 2.14 2.28
V_{(SVSH_IT+)}
SVS_H off voltage level⁽¹⁾
SVSHE = 1, SVSMHRRL = 3
SVSHE = 1, SVSMHRRL = 4
2.20 2.30 2.42
V
2.32 2.40 2.55
SVSHE = 1, SVSMHRRL = 5
2.52 2.70 2.88
SVSHE = 1, SVSMHRRL = 6
2.90 3.10 3.23
SVSHE = 1, SVSMHRRL = 7
2.90 3.10 3.23
t_pd(SVSH)
t_(SVSH)
SVS_H propagation delay
SVS_H on or off delay time
SVSHE = 1, dV_DVCC/dt = 10 mV/µs, SVSHFP = 1
SVSHE = 1, dV_DVCC/dt = 1 mV/µs, SVSHFP = 0
SVSHE = 0 → 1, SVSHFP = 1
SVSHE = 0 → 1, SVSHFP = 0
2.5
µs
20
12.5
µs
100
dV_DVCC/dt
DV_CC rise time
0
1000 V/s
(1) The SVS_H settings available depend on the VCORE (PMMCOREVx) setting. See the Power Management Module and Supply Voltage
Supervisor chapter in the MSP430x5xx and MSP430x6xx Family User's Guide (SLAU208) on recommended settings and use.
PMM, SVM High Side
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN TYP
I_(SVMH)
SVM_H current consumption
SVMHE = 0, DV_CC = 3.6 V
SVMHE= 1, DV_CC = 3.6 V, SVMHFP = 0
SVMHE = 1, DV_CC = 3.6 V, SVMHFP = 1
SVMHE = 1, SVSMHRRL = 0
0
200
1.5
1.62 1.74
SVMHE = 1, SVSMHRRL = 1
1.88 1.94
SVMHE = 1, SVSMHRRL = 2
2.07 2.14
V_(SVMH)
SVM_H on or off voltage level⁽¹⁾
SVMHE = 1, SVSMHRRL = 3
SVMHE = 1, SVSMHRRL = 4
SVMHE = 1, SVSMHRRL = 5
2.20 2.30
2.32 2.40
2.52 2.70
SVMHE = 1, SVSMHRRL = 6
2.90 3.10
SVMHE = 1, SVSMHRRL = 7
2.90 3.10
SVMHE = 1, SVMHOVPE = 1
3.75
t_pd(SVMH) SVM_H propagation delay
t_(SVMH)
SVM_H on or off delay time
SVMHE = 1, dV_DVCC/dt = 10 mV/µs, SVMHFP = 1
SVMHE = 1, dV_DVCC/dt = 1 mV/µs, SVMHFP = 0
SVMHE = 0 → 1, SVMHFP = 1
SVMHE = 0 → 1, SVMHFP = 0
2.5
20
12.5
100
MAX UNIT
nA
nA
µA
1.85
2.07
2.28
2.42
2.55 V
2.88
3.23
3.23
µs
µs
(1) The SVM_H settings available depend on the VCORE (PMMCOREVx) setting. See the Power Management Module and Supply Voltage
Supervisor chapter in the MSP430x5xx and MSP430x6xx Family User's Guide (SLAU208) on recommended settings and use.
54
Submit Documentation Feedback
Copyright © 2010–2013, Texas Instruments Incorporated
Product Folder Links: MSP430F5438A MSP430F5437A MSP430F5436A MSP430F5435A MSP430F5419A
MSP430F5418A