CC3220MOD_17 Datasheet, PDF (30/88 Pages) Texas Instruments – SimpleLink Wi-Fi CERTIFIED Wireless Module Solutions (S and SF)

CC3220MOD
SWRS206A – MARCH 2017 – REVISED JUNE 2017
www.ti.com
5 Specifications
5.1 Absolute Maximum Ratings
All measurements are referenced at the module pins unless otherwise indicated. All specifications are over process and
voltage unless otherwise indicated.
over operating free-air temperature range (unless otherwise noted)⁽¹⁾⁽²⁾
MIN
MAX UNIT
V_BAT
Digital I/O
RF pin
–0.5
–0.5
–0.5
3.8 V
V_BAT + 0.5
V
2.1 V
Analog pins
–0.5
2.1 V
Operating temperature (T_A)
Storage temperature (T_stg)
Junction temperature (T_j)⁽³⁾
–40
85 °C
–40
85 °C
120 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to V_SS, unless otherwise noted.
(3) Junction temperature is for the CC3220x device that is contained within the module.
5.2 ESD Ratings
V_ESD
Electrostatic discharge
Human body model (HBM), per ANSI/ESDA/JEDEC JS001⁽¹⁾
Charged device model (CDM),
per JESD22-C101⁽²⁾
All pins
VALUE
±2000
±500
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
UNIT
V
5.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)^(1)(2)(3)
MIN
TYP MAX
UNIT
V_BAT
Operating temperature
2.3
3.3
3.6
V
–40
25
85
°C
Ambient thermal slew
–20
20 °C/minute
(1) To ensure WLAN performance, the ripple on the power supply must be less than ±300 mV. The ripple should not cause the supply to fall
below the brownout voltage.
(2) When operating at an ambient temperature of over 75°C, the transmit duty cycle must remain below 50% to avoid the auto-protect
feature of the power amplifier. If the auto-protect feature triggers, the device takes a maximum of 60 seconds to restart the transmission.
(3) The minimum voltage specified includes the ripple on the supply voltage and all other transient dips. The brownout condition is also 2.1
V, and care must be taken when operating at the minimum specified voltage.
30
Specifications
Submit Documentation Feedback
Product Folder Links: CC3220MOD
Copyright © 2017, Texas Instruments Incorporated