CC2650MODA Datasheet, PDF (30/40 Pages) Texas Instruments – Low energy Wireless MCU Module

CC2650MODA
SWRS187A – AUGUST 2016 – REVISED AUGUST 2016
www.ti.com
6.11 System Architecture
Depending on the product configuration, CC26xx can function either as a Wireless Network Processor
(WNP—an IC running the wireless protocol stack, with the application running on a separate MCU), or as
a System-on-Chip (SoC), with the application and protocol stack running on the ARM CM3 core inside the
device.
In the first case, the external host MCU communicates with the device using SPI or UART. In the second
case, the application must be written according to the application framework supplied with the wireless
protocol stack.
6.12 Certification
The CC2650MODA module is certified to the standards listed in Table 6-3 (with IDs where applicable):
REGULATORY BODY
FCC (USA)
IC (Canada)
ETSI/CE (Europe)
Japan MIC
Table 6-3. CC2650MODA List of Certifications
SPECIFICATION
Part 15C:2015+MPE FCC 1.1307 RF Exposure (Bluetooth)
Part 15C:2015+MPE FCC 1.1307 RF Exposure (802.15.4)
RSS-102 (MPE) and RSS-247 (Bluetooth)
RSS-102 (MPE) and RSS-247 (IEEE 802.15.4)
EN300328 v1.9.1 (Bluetooth)
EN300328 v1.9.1 (802.15.4)
IEC/EN62479:Ver 2010 (MPE)
EN301489-1 v1.9.2:2011
EN301489-17 v2.2.1:2012 (EMC)
EN55022:2010+AC:2011
EN55024:2011
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/A2:2013
ARIB STD-T66
JATE
ID (IF APPLICABLE)
FCC ID: ZAT26M1
ID: 451H-26M1
No: 201-160413/00
D 16 0092 201/00
6.12.1 Federal Communications Commission Statement
You are cautioned that changes or modifications not expressly approved by the part responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference and
2. This device must accept any interference received, including interference that may cause undesired
operation of the device.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End
users must follow the specific operating instructions for satisfying RF exposure limits. This transmitter
must not be colocated or operating with any other antenna or transmitter.
30
Detailed Description
Submit Documentation Feedback
Product Folder Links: CC2650MODA
Copyright © 2016, Texas Instruments Incorporated