CC2650MODA Datasheet, PDF (1/40 Pages) Texas Instruments – Low energy Wireless MCU Module

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
CC2650MODA
SWRS187A – AUGUST 2016 – REVISED AUGUST 2016
CC2650MODA SimpleLink™ Bluetooth^® low energy Wireless MCU Module
1 Device Overview
1.1 Features
1
• Microcontroller
– Powerful ARM^® Cortex^®-M3
– EEMBC CoreMark^® Score: 142
– Up to 48-MHz Clock Speed
– 128KB of In-System Programmable Flash
– 8KB of SRAM for Cache
– 20KB of Ultra-Low-Leakage SRAM
– 2-Pin cJTAG and JTAG Debugging
– Supports Over-The-Air (OTA) Upgrade
• Ultra-Low-Power Sensor Controller
– Can Run Autonomous From the Rest of the
System
– 16-Bit Architecture
– 2KB of Ultra-Low-Leakage SRAM for
Code and Data
• Efficient Code Size Architecture, Placing Drivers,
Bluetooth^® low energy Controller, IEEE^® 802.15.4
Medium Access Control (MAC), and Bootloader in
ROM
• Integrated Antenna
• Peripherals
– All Digital Peripheral Pins Can Be Routed to
Any GPIO
– Four General-Purpose Timer Modules
(8 × 16-Bit or 4 × 32-Bit Timer, PWM Each)
– 12-Bit ADC, 200-ksamples/s, 8-Channel
Analog MUX
– Continuous Time Comparator
– Ultra-Low-Power Analog Comparator
– Programmable Current Source
– UART
– 2 × SSI (SPI, MICROWIRE, TI)
– I²C
– I2S
– Real-Time Clock (RTC)
– AES-128 Security Module
– True Random Number Generator (TRNG)
– 15 GPIOs
– Support for Eight Capacitive Sensing Buttons
– Integrated Temperature Sensor
• External System
– On-Chip Internal DC-DC Converter
– No External Components Needed, Only Supply
Voltage
• Low Power
– Wide Supply Voltage Range
• Operation from 1.8 to 3.8 V
– Active-Mode RX: 6.2 mA
– Active-Mode TX at 0 dBm: 6.8 mA
– Active-Mode TX at +5 dBm: 9.4 mA
– Active-Mode MCU: 61 µA/MHz
– Active-Mode MCU: 48.5 CoreMark/mA
– Active-Mode Sensor Controller:
0.4 mA + 8.2 µA/MHz
– Standby: 1 µA (RTC Running and RAM/CPU
Retention)
– Shutdown: 100 nA (Wake Up on External
Events)
• RF Section
– 2.4-GHz RF Transceiver Compatible With
Bluetooth low energy (BLE) 4.2 Specification
and IEEE 802.15.4 PHY and MAC
– Excellent Receiver Sensitivity (–97 dBm for
Bluetooth low energy and –100 dBm for
802.15.4), Selectivity, and Blocking
Performance
– Programmable Output Power up to +5 dBm
– Pre-certified for Compliance With Worldwide
Radio Frequency Regulations
• ETSI (Europe)
• IC (Canada)
• FCC (USA)
• ARIB STD-T66 (Japan)
• JATE (Japan)
• Tools and Development Environment
– Full-Feature and Low-Cost Development Kits
– Multiple Reference Designs for Different RF
Configurations
– Packet Sniffer PC Software
– Sensor Controller Studio
– SmartRF™ Studio
– SmartRF Flash Programmer 2
– IAR Embedded Workbench^® for ARM
– Code Composer Studio™
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.