CC2650MODA Datasheet, PDF (11/40 Pages) Texas Instruments – Low energy Wireless MCU Module

www.ti.com
CC2650MODA
SWRS187A – AUGUST 2016 – REVISED AUGUST 2016
5.8 1-Mbps GFSK (Bluetooth low energy) – TX
RF performance is specified in a single ended 50-Ω reference plane at the antenna feeding point with T_c = 25°C,
V_DD = 3.0 V, f_RF = 2440 MHz, unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
Output power, highest setting
5
dBm
Output power, lowest setting
–21
dBm
f < 1 GHz, outside restricted bands
–43
Spurious emission conducted ^{f < 1 GHz, restricted bands ETSI}
measurement ⁽¹⁾
f < 1 GHz, restricted bands FCC
–58
dBm
–57
f > 1 GHz, including harmonics
–45
(1) Suitable for systems targeting compliance with worldwide radio-frequency regulations ETSI EN 300 328 and EN 300 440 Class 2
(Europe), FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan)
5.9 IEEE 802.15.4 (Offset Q-PSK DSSS, 250 kbps) – RX
RF performance is specified in a single ended 50-Ω reference plane at the antenna feeding point with T_c = 25°C,
V_DD = 3.0 V, unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN
TYP MAX
Receiver sensitivity
PER = 1%
–100
Receiver saturation
PER = 1%
–7
Adjacent channel rejection
Wanted signal at –82 dBm, modulated interferer at ±5 MHz,
PER = 1%
35
Alternate channel rejection
Wanted signal at –82 dBm, modulated interferer at ±10 MHz,
PER = 1%
52
Channel rejection, ±15 MHz or
more
Wanted signal at –82 dBm, undesired signal is IEEE 802.15.4
modulated channel, stepped through all channels 2405 to
2480 MHz, PER = 1%
57
Blocking and desensitization,
5 MHz from upper band edge
Wanted signal at –97 dBm (3 dB above the sensitivity level),
CW jammer, PER = 1%
64
Blocking and desensitization,
10 MHz from upper band edge
Wanted signal at –97 dBm (3 dB above the sensitivity level),
CW jammer, PER = 1%
64
Blocking and desensitization,
20 MHz from upper band edge
Wanted signal at –97 dBm (3 dB above the sensitivity level),
CW jammer, PER = 1%
65
Blocking and desensitization,
50 MHz from upper band edge
Wanted signal at –97 dBm (3 dB above the sensitivity level),
CW jammer, PER = 1%
68
Blocking and desensitization,
–5 MHz from lower band edge
Wanted signal at –97 dBm (3 dB above the sensitivity level),
CW jammer, PER = 1%
63
Blocking and desensitization,
–10 MHz from lower band edge
Wanted signal at –97 dBm (3 dB above the sensitivity level),
CW jammer, PER = 1%
63
Blocking and desensitization,
–20 MHz from lower band edge
Wanted signal at –97 dBm (3 dB above the sensitivity level),
CW jammer, PER = 1%
65
Blocking and desensitization,
–50 MHz from lower band edge
Wanted signal at –97 dBm (3 dB above the sensitivity level),
CW jammer, PER = 1%
67
Conducted measurement in a 50-Ω single-ended load.
Spurious emissions,
30 MHz to 1000 MHz
Suitable for systems targeting compliance with EN 300 328,
EN 300 440 class 2, FCC CFR47, Part 15 and ARIB STD-T-
–71
66
Conducted measurement in a 50-Ω single-ended load.
Spurious emissions,
1 GHz to 12.75 GHz
Suitable for systems targeting compliance with EN 300 328,
EN 300 440 class 2, FCC CFR47, Part 15 and ARIB STD-T-
–62
66
Frequency error tolerance
Difference between center frequency of the received RF
signal and local oscillator frequency
>200
RSSI dynamic range
100
RSSI accuracy
±4
UNIT
dBm
dBm
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dBm
dBm
ppm
dB
dB
Copyright © 2016, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: CC2650MODA
Specifications
11