DS92LV8028_13 Datasheet, PDF (3/22 Pages) Texas Instruments – 8 Channel 10:1 Serializer

www.ti.com
DS92LV8028
SNLS152I – NOVEMBER 2001 – REVISED APRIL 2013
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings ⁽¹⁾⁽²⁾
Supply Voltage (V_CC)
LVCMOS/LVTTL Input Voltage
Bus LVDS Driver Output Voltage
Bus LVDS Output Short Circuit Duration
Package Thermal Resistance
Storage Temperature
θ_JA 196 NFBGA:
θ_JC 196 NFBGA:
Junction Temperature
Lead Temperature
(Soldering, 10 seconds)
ESD Rating (HBM)
Reliability Information
Transistor Count:
−0.3V to +4V
−0.3V to (V_CC +0.3V)
−0.3V to +3.9V
10ms
34°C/W
8°C/W
−65°C to +150°C
+125°C
+225°C
±3.0kV
37.5k
(1) “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be specified. They are not meant to imply
that the devices should be operated at these limits. The table of “Electrical Characteristics” specifies conditions of device operation.
(2) If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications.
Recommended Operating Conditions
Supply Voltage (V_CC)
Operating Free Air Temperature (T_A)
Clock Rate
Min
Typ
Max
Units
3.0
3.3
3.6
V
−40
+25
+85
°C
25
66
MHz
Electrical Characteristics
Over recommended operating supply and temperature ranges unless otherwise specified.^{(1) (2)}
Symbol
Parameter
Conditions
Pin/Freq.
Min
LVCMOS/LVTTL DC Specifications
V_IH
High Level Input Voltage
V_IL
Low Level Input Voltage
V_CL
Input Clamp Voltage
I_IN
Input Current
Bus LVDS DC Specifications
I_CL = −18 mA
V_IN = 0V or 3.6V
DINn[0-9], TCLK,
MS_PWDN, PWDNn,
SYNCn, DEN,
BIST_ACT,
BIST_SEL<0:3> ⁽³⁾
2.0
GND
−10
Over recommended operating supply and temperature unless otherwise specified.
Typ Max Units
V_CC
V
0.8
V
−0.87 −1.5 V
+/− 1 +10 μA
(1) Typical values are given for V_CC = 3.3V and T_A = +25°C.
(2) Current into device pins is defined as positive. Current out of device pins is defined as negative. Voltages are referenced to ground
except VOD, and ΔVOD which are differential voltages.
(3) BIST_SEL pins are pull-up internally.
Copyright © 2001–2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: DS92LV8028