DS90CR481_15 Datasheet, PDF (3/25 Pages) Texas Instruments – 48-Bit LVDS Channel Link SER/DES − 65 - 112 MHz

DS90CR481, DS90CR482
www.ti.com
SNLS137D – NOVEMBER 2000 – REVISED APRIL 2013
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings⁽¹⁾⁽²⁾
Supply Voltage (V_CC)
CMOS/TTL Input Voltage
LVCMOS/TTL Output Voltage
LVDS Receiver Input Voltage
LVDS Driver Output Voltage
LVDS Output Short Circuit Duration
Junction Temperature
Storage Temperature
Lead Temperature (Soldering, 4 sec.) 100L TQFP
Maximum Package Power Dissipation Capacity @ 25°C, 100 TQFP
Package:
Package Derating:
ESD Rating: DS90CR481
ESD Rating: DS90CR482
DS90CR481VJD
DS90CR482VS
DS90CR481VJD
DS90CR482VS
(HBM, 1.5kΩ, 100pF)
(EIAJ, 0Ω, 200pF)
(HBM, 1.5kΩ, 100pF)
(EIAJ, 0Ω, 200pF)
Value
−0.3 to +4
−0.3 to +5.5
−0.3 to (V_CC + 0.3)
−0.3 to +3.6
−0.3 to +3.6
Continuous
+150
−65 to +150
+260
2.3
2.3
18.1mW/°C above
+25°C
18.1mW/°C above
+25°C
>6
> 300
>2
> 200
Unit
V
V
V
V
V
°C
°C
°C
W
W
kV
V
kV
V
(1) “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to
imply that the device should be operated at these limits. “Electrical Characteristics” specify conditions for device operation.
(2) If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications.
Recommended Operating Conditions
Supply Voltage (V_CC)
Operating Free Air Temperature (T_A)
Supply Noise Voltage
Input Clock (TX)
Min
Nom
Max
3.0
3.3
3.6
−10
+25
+70
100
65
112
Units
V
°C
mV_p-p
MHz
Electrical Characteristics⁽¹⁾
Over recommended operating supply and temperature ranges unless otherwise specified.
Symbol
Parameter
Conditions
Min Typ⁽²⁾ Max Units
CMOS/TTL DC SPECIFICATIONS
V_IH
High Level Input Voltage
V_IL
Low Level Input Voltage
V_OH
High Level Output Voltage I_OH = −0.4 mA
I_OH = −2mA
V_OL
Low Level Output Voltage I_OL = 2 mA
V_CL
Input Clamp Voltage
I_CL = −18 mA
I_IN
Input Current
V_IN = 0.4V, 2.5V or V_CC
V_IN = GND
2.0
V
GND
0.8
V
2.7
2.9
V
2.7
2.85
V
0.1
0.3
V
−0.79 −1.5
V
+1.8
+15
µA
−15
0
µA
(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. Voltages are referenced to ground
unless otherwise specified (except V_TH, V_TL, V_OD and ΔV_OD).
(2) Typical values are given for V_CC = 3.3V and T _A = +25°C.
Copyright © 2000–2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: DS90CR481 DS90CR482