BQ25601 Datasheet, PDF (3/60 Pages) Texas Instruments – I2C Controlled 3-A, Single-Cell Battery Charger for High Input Voltage and Narrow Voltage DC (NVDC) Power Path Management

bq25601
www.ti.com
SLUSCK5 – MARCH 2017
The charger provides various safety features for battery charging and system operations, including battery
temperature negative thermistor monitoring, charging safety timer and overvoltage and overcurrent protections.
The thermal regulation reduces charge current when the junction temperature exceeds 110°C (programmable).
The STAT output reports the charging status and any fault conditions. The VBUS_GD bit indicates if a good
power source is present. The INT output Immediately notifies host when fault occurs.
The device also provides QON pin for BATFET enable and reset control to exit low power ship mode or full
system reset function.
The device is available in 24-pin, 4 mm × 4 mm x 0.75 mm thin WQFN package.
Copyright © 2017, Texas Instruments Incorporated
Product Folder Links: bq25601
Submit Documentation Feedback
3