English
Language : 

MSP430BT5190_15 Datasheet, PDF (28/105 Pages) Texas Instruments – Mixed-Signal Microcontroller
◁
MSP430BT5190
SLAS703B – APRIL 2010 – REVISED AUGUST 2015
www.ti.com
5.25 PMM, SVS Low Side
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP
SVSLE = 0, PMMCOREV = 2
0
I(SVSL)
SVSL current consumption
SVSLE = 1, PMMCOREV = 2, SVSLFP = 0
200
SVSLE = 1, PMMCOREV = 2, SVSLFP = 1
1.5
SVSLE = 1, dVCORE/dt = 10 mV/µs,
SVSLFP = 1
2.5
tpd(SVSL)
SVSL propagation delay
SVSLE = 1, dVCORE/dt = 1 mV/µs,
SVSLFP = 0
20
t(SVSL)
SVSL on or off delay time
SVSLE = 0 → 1, dVCORE/dt = 10 mV/µs,
SVSLFP = 1
SVSLE = 0 → 1, dVCORE/dt = 1 mV/µs,
SVSLFP = 0
12.5
100
MAX UNIT
nA
µA
µs
µs
5.26 PMM, SVM Low Side
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP
SVMLE = 0, PMMCOREV = 2
0
I(SVML)
SVML current consumption
SVMLE= 1, PMMCOREV = 2, SVMLFP = 0
200
SVMLE= 1, PMMCOREV = 2, SVMLFP = 1
1.5
SVMLE = 1, dVCORE/dt = 10 mV/µs,
SVMLFP = 1
2.5
tpd(SVML) SVML propagation delay
SVMLE = 1, dVCORE/dt = 1 mV/µs,
SVMLFP = 0
20
t(SVML)
SVML on or off delay time
SVMLE = 0 → 1, dVCORE/dt = 10 mV/µs,
SVMLFP = 1
SVMLE = 0 → 1, dVCORE/dt = 1 mV/µs,
SVMLFP = 0
12.5
100
MAX UNIT
nA
µA
µs
µs
5.27 Wake-up Times From Low-Power Modes and Reset
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNIT
tWAKE-UP-
FAST
Wake-up time from LPM2, LPM3, or LPM4
to active mode(1)
PMMCOREV = SVSMLRRL = n
(where n = 0, 1, 2, or 3),
SVSLFP = 1
fMCLK ≥ 4.0 MHz
fMCLK < 4.0 MHz
5
µs
6
tWAKE-UP-
SLOW
Wake-up time from LPM2, LPM3 or LPM4 to
active mode(2)
PMMCOREV = SVSMLRRL = n
(where n = 0, 1, 2, or 3),
SVSLFP = 0
150 165 µs
tWAKE-UP-
LPM5
tWAKE-UP-
RESET
Wake-up time from LPM4.5 to active
mode (3)
Wake-up time from RST or BOR event to
active mode(3)
2 3 ms
2 3 ms
(1) This value represents the time from the wake-up event to the first active edge of MCLK. The wakeup time depends on the performance
mode of the low-side supervisor (SVSL) and low-side monitor (SVML). Fastest wakeup times are possible with SVSL and SVML in full
performance mode or disabled when operating in AM, LPM0, and LPM1. Various options are available for SVSL and SVML while
operating in LPM2, LPM3, and LPM4. See the Power Management Module and Supply Voltage Supervisor chapter in the MSP430x5xx
and MSP430x6xx Family User's Guide (SLAU208).
(2) This value represents the time from the wake-up event to the first active edge of MCLK. The wakeup time depends on the performance
mode of the low-side supervisor (SVSL) and low-side monitor (SVML). In this case, the SVSL and SVML are in normal mode (low
current) mode when operating in AM, LPM0, and LPM1. Various options are available for SVSL and SVML while operating in LPM2,
LPM3, and LPM4. See the Power Management Module and Supply Voltage Supervisor chapter in the MSP430x5xx and MSP430x6xx
Family User's Guide (SLAU208).
(3) This value represents the time from the wake-up event to the reset vector execution.
28
Specifications
Copyright © 2010–2015, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: MSP430BT5190
 ▷