MSP430BT5190_15 Datasheet, PDF (1/105 Pages) Texas Instruments – Mixed-Signal Microcontroller

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
MSP430BT5190
SLAS703B – APRIL 2010 – REVISED AUGUST 2015
MSP430BT5190 Mixed-Signal Microcontroller
1 Device Overview
1.1 Features
1
• Designed for Use With CC2560 TI Bluetooth^®
Based Solutions ⁽¹⁾
• Commercially Licensed Mindtree™ Ethermind
Bluetooth Stack for MSP430
– Bluetooth v2.1 + Enhanced Data Rate (EDR)
Compliant
– Serial Port Profile (SPP)
– Sample Applications
• Low Supply Voltage Range:
3.6 V Down to 1.8 V
• Ultra-Low Power Consumption
– Active Mode (AM):
All System Clocks Active
230 µA/MHz at 8 MHz, 3 V, Flash Program
Execution (Typical)
110 µA/MHz at 8 MHz, 3 V, RAM Program
Execution (Typical)
– Standby Mode (LPM3):
Real-Time Clock (RTC) With Crystal, Watchdog,
and Supply Supervisor Operational, Full RAM
Retention, Fast Wake-Up:
1.7 µA at 2.2 V, 2.1 µA at 3 V (Typical)
Low-Power Oscillator (VLO), General-Purpose
Counter, Watchdog, and Supply Supervisor
Operational, Full RAM Retention, Fast Wakeup:
1.2 µA at 3 V (Typical)
– Off Mode (LPM4):
Full RAM Retention, Supply Supervisor
Operational, Fast Wakeup:
1.2 µA at 3 V (Typical)
– Shutdown Mode (LPM4.5):
0.1 µA at 3 V (Typical)
• Wake up From Standby Mode in Less Than 5 µs
• 16-Bit RISC Architecture
• Flexible Power-Management System
– Fully Integrated LDO With Programmable
Regulated Core Supply Voltage
– Supply Voltage Supervision, Monitoring, and
Brownout
(1) The Bluetooth word mark and logos are owned by Bluetooth
SIG, Inc., and any use of such marks by TI is under license.
1.2 Applications
• Remote Controls
• Thermostats
• Smart Meters
• Unified Clock System
– FLL Control Loop for Frequency Stabilization
– Low-Power Low-Frequency Internal Clock
Source (VLO)
– Low-Frequency Trimmed Internal Reference
Source (REFO)
– 32-kHz Crystals
– High-Frequency Crystals up to 32 MHz
• 16-Bit Timer TA0, Timer_A With Five
Capture/Compare Registers
• 16-Bit Timer TA1, Timer_A With Three
Capture/Compare Registers
• 16-Bit Timer TB0, Timer_B With Seven
Capture/Compare Shadow Registers
• Up to Four Universal Serial Communication
Interfaces (USCIs)
– USCI_A0, USCI_A1, USCI_A2, and USCI_A3
Each Support:
• Enhanced UART Supports Automatic Baud-
Rate Detection
• IrDA Encoder and Decoder
• Synchronous SPI
– USCI_B0, USCI_B1, USCI_B2, and USCI_B3
Each Support:
• I²C
• Synchronous SPI
• 12-Bit Analog-to-Digital Converter (ADC)
– Internal Reference
– 14 External Channels, 2 Internal Channels
• Hardware Multiplier Supports 32-Bit Operations
• Serial Onboard Programming, No External
Programming Voltage Needed
• 3-Channel Internal DMA
• Basic Timer With RTC Feature
• For Complete Module Descriptions, See the
MSP430x5xx and MSP430x6xx Family User's
Guide (SLAU208)
• Blood Glucose Meters
• Pulseoximeters
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.