MSP430G2332-EP Datasheet, PDF (25/55 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430G2332-EP
www.ti.com
SLAS885A – AUGUST 2012 – REVISED OCTOBER 2012
POR/Brownout Reset (BOR)⁽¹⁾
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
V_CC(start)
V_{(B_IT–)}
V_{hys(B_IT–)}
t_d(BOR)
t_(reset)
PARAMETER
See Figure 13
See Figure 13 through Figure 15
See Figure 13
See Figure 13
Pulse length needed at RST/NMI pin to
accepted reset internally⁽²⁾
TEST CONDITIONS
dV_CC/dt ≤ 3 V/s
dV_CC/dt ≤ 3 V/s
dV_CC/dt ≤ 3 V/s
V_CC
2.2 V
MIN TYP
0.7 × V_{(B_IT–)}
1.40
140
MAX
2000
UNIT
V
V
mV
µs
2
µs
(1) The current consumption of the brownout module is already included in the I_CC current consumption data. The voltage level V_{(B_IT–)} +
V_{hys(B_IT–)} is ≤ 1.8 V.
(2) Minimum and maximum parameters are characterized up to T_A = 105°C, unless otherwise noted.
VCC
Vhys(B_IT−)
V(B_IT−)
V_{CC(s t ar t )}
1
0
t _d(BOR)
Figure 13. POR/Brownout Reset (BOR) vs Supply Voltage
Copyright © 2012, Texas Instruments Incorporated
Submit Documentation Feedback
25