MSP430G2332-EP Datasheet, PDF (14/55 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430G2332-EP
SLAS885A – AUGUST 2012 – REVISED OCTOBER 2012
www.ti.com
Timer0_A3
Timer0_A3 is a 16-bit timer/counter with three capture/compare registers. Timer0_A3 can support multiple
capture/compares, PWM outputs, and interval timing. Timer0_A3 also has extensive interrupt capabilities.
Interrupts may be generated from the counter on overflow conditions and from each of the capture/compare
registers.
Table 12. Timer0_A3 Signal Connections⁽¹⁾
INPUT PIN NUMBER
PW20
DEVICE INPUT
SIGNAL
MODULE INPUT
NAME
P1.0-2
TACLK
TACLK
ACLK
ACLK
SMCLK
SMCLK
PinOsc
INCLK
P1.1-3
TA0.0
CCI0A
ACLK
CCI0B
P1.2-4
V_SS
V_CC
TA0.1
GND
V_CC
CCI1A
CAOUT
CCI1B
P1.4-6
V_SS
V_CC
TA0.2
GND
V_CC
CCI2A
PinOsc
TA0.2
CCI2B
V_SS
V_CC
GND
V_CC
(1) Only one pin-oscillator must be enabled at a time.
MODULE BLOCK
MODULE OUTPUT
SIGNAL
Timer
NA
CCR0
TA0
CCR1
TA1
CCR2
TA2
OUTPUT PIN
NUMBER
PW20
P1.1-3
P1.5-7
P1.2-4
P1.6-14
P2.6-19
P1.4-6
USI
The universal serial interface (USI) module is used for serial data communication and provides the basic
hardware for synchronous communication protocols like SPI and I2C.
ADC10
The ADC10 module supports fast, 10-bit analog-to-digital conversions. The module implements a 10-bit SAR
core, sample select control, reference generator and data transfer controller, or DTC, for automatic conversion
result handling, allowing ADC samples to be converted and stored without any CPU intervention.
14
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated