DS90CF384AQ_15 Datasheet, PDF (2/18 Pages) Texas Instruments – +3.3V LVDS Receiver 24-Bit Flat Panel Display (FPD) Link - 65 MHz

DS90CF384AQ
SNLS345A – AUGUST 2011 – REVISED APRIL 2013
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
Absolute Maximum Ratings⁽¹⁾⁽²⁾
Supply Voltage (V_CC)
LVCMOS/LVTTL Input Voltage
LVCMOS/LVTTL Output Voltage
LVDS Receiver Input Voltage
Junction Temperature
Storage Temperature
For soldering specifications: see http://www.ti.com/lit/SNOA549
Maximum Package Power Dissipation Capacity @ 25°C
DGG Package:
DGG Package Derating:
ESD Rating
(HBM, 1.5 kΩ, 100 pF)
(EIAJ, 0Ω, 200 pF)
−0.3V to +4V
−0.3V to (V_CC + 0.3V)
−0.3V to (V_CC + 0.3V)
−0.3V to (V_CC + 0.3V)
+150°C
−65°C to +150°C
1.61 W
12.4 mW/°C above +25°C
> 7 kV
> 700V
(1) If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications.
(2) “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be ensured. They are not meant to imply
that the device should be operated at these limits. The “Electrical Characteristics” specify conditions for device operation.
Recommended OperatingConditions
Supply Voltage (V_CC)
Operating Free Air
Temperature (T_A )
Receiver Input Range
Supply Noise Voltage (V_CC)
Min
Nom
Max
Units
3.0
3.3
3.6
V
−40
+25
+85
0
2.4
100
°C
V
mV_PP
Electrical Characteristics
Over recommended operating supply and temperature ranges unless otherwise specified.
Symbol
Parameter
Conditions
LVCMOS/LVTTL DC SPECIFICATIONS (For Power Down Pin)
V_IH
High Level Input Voltage
V_IL
Low Level Input Voltage
V_CL
Input Clamp Voltage
I_IN
Input Current
LVCMOS/LVTTL DC SPECIFICATIONS
I_CL = −18 mA
V _IN = 0.4V, 2.5V or V_CC
V _IN = GND
V_OH
High Level Output Voltage
V_OL
Low Level Output Voltage
I_OS
Output Short Circuit Current
LVDS RECEIVER DC SPECIFICATIONS
I_OH = −0.4 mA
I_OL = 2 mA
V_OUT = 0V
V_TH
Differential Input High Threshold
V_TL
Differential Input Low Threshold
I_IN
Input Current
V _CM = +1.2V
V _IN = +2.4V, V_CC = 3.6V
V _IN = 0V, V_CC = 3.6V
Min
2.0
GND
−10
2.7
−100
Typ⁽¹⁾ Max
−0.79
+1.8
0
V_CC
0.8
−1.5
+10
3.3
0.06 0.3
−60 −120
+100
±10
±10
Units
V
V
V
μA
μA
V
V
mA
mV
mV
μA
μA
(1) Typical values are given for V_CC = 3.3V and T_A = +25C.
2
Submit Documentation Feedback
Copyright © 2011–2013, Texas Instruments Incorporated
Product Folder Links: DS90CF384AQ