AMC80 Datasheet, PDF (2/23 Pages) Texas Instruments – System Hardware Monitor with Two-Wire/SMBus Serial Interface

AMC80
SBOS559 – MAY 2011
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
PRODUCT
AMC80
PACKAGE INFORMATION⁽¹⁾
PACKAGE-
LEAD
PACKAGE
DESIGNATOR
TSSOP-24
PW
PACKAGE
MARKING
AMC80A
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
Over operating free-air temperature range, unless otherwise noted.
Power supply voltage range, V+
Pin 6
Input voltage range, V_{IN Pins 1, 2, 3, 4, 5, 7, 11, 12, 13}
Input current, I_IN
Operating temperature range, T_A
Storage temperature range, T_STG
Junction temperature range (T_J max)
Human body model (HBM)
ESD ratings
Charged device model (CDM)
Machine model (MM)
AMC80
–0.3 to 7
–0.3 to (V+) + 0.3
–0.3 to 7
10
–55 to +127
–65 to +150
+150
2.5
1
0.2
UNIT
V
V
V
mA
°C
°C
°C
kV
kV
kV
(1) Stresses above these ratings my cause permanent damage. Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those specified is not implied.
THERMAL INFORMATION
θ_JA
θ_JC(top)
θ_JB
ψ_JT
ψ_JB
θ_JC(bottom)
THERMAL METRIC⁽¹⁾
Junction-to-ambient thermal resistance
Junction-to-case(top) thermal resistance
Junction-to-board thermal resistance
Junction-to-top characterization parameter
Junction-to-board characterization parameter
Junction-to-case(bottom) thermal resistance
AMC80
PW
24 PINS
100.72
31.4
54.7
1.0
54.2
N/A
UNITS
°C/W
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.
RECOMMENDED OPERATING CONDITIONS
Supply voltage range, V+
Input voltage range, V_IN
Operating temperature range, T_A
MIN
3
–0.05
–40
NOM
MAX
5.5
(V+) + 0.05
+125
UNIT
V
V
°C
2
Submit Documentation Feedback
Product Folder Link(s): AMC80
Copyright © 2011, Texas Instruments Incorporated