SLAU292C Datasheet, PDF (18/102 Pages) Texas Instruments – eZ430-Chronos™ Development Tool

eZ430-Chronos Sports Watch Software
3.2.1 Detailed Feature Overview - Modes Using the Top LCD Line
www.ti.com
3.2.1.1 Time Mode
Press "*" until the time mode is active (see Figure 3-1 for details).
Secondary function: Seconds. Press "UP" to activate the alternative display. To return to the HH:MM
mode, push the "UP" button again.
Set function: Setting the time.
1. Hold "*" for 3 seconds until the time disappears and "12H" or "24H" is shown on the LCD
2. Select 12H/24H modes by pushing the "UP" or "DOWN" buttons
3. Press "#" to continue with the time adjustment
4. Set the hours by pushing the "UP" or "DOWN" button
5. Press "#" to continue with the minutes adjustment
6. Set the minutes by pushing the "UP" or "DOWN" button
7. Press "#" to continue with the second adjustment
8. Set the seconds by pushing the "UP" or "DOWN" button
9. Press "*" to confirm your settings and go back to normal operation or "#" to start over with step 2
NOTE: If you do not press any button for more than 30 seconds, the previous settings are restored.
3.2.1.2 Alarm Mode
Press "*" until the alarm mode is active (see Figure 3-1 for details). The alarm mode can be distinguished
from time mode, as an alarm symbol (bell) flashes when the alarm time is displayed.
Secondary function: Alarm on/off. Press "UP" to enable/disable the alarm. The settings are confirmed by
"on" and "off" in the top LCD line. The bell icon stays on in all other modes when the alarm is enabled and
does not appear when it is disabled.
Set function: Setting the alarm time.
1. Hold "*" for 3 seconds until the alarm time hour starts to flash
2. Set the hours by pushing the "UP" or "DOWN" button
3. Press "#" to continue with the minutes adjustment
4. Set the minutes by pushing the "UP" or "DOWN" button
5. Press "*" to confirm your settings and go back to normal operation or "#" to start over with step 2
NOTE: If you do not press any button for more than 30 seconds, the previous settings are restored.
18
eZ430-Chronos Software
SLAU292C – November 2009 – Revised December 2010
Submit Documentation Feedback
© 2009–2010, Texas Instruments Incorporated