AM1810_16 Datasheet, PDF (160/262 Pages) Texas Instruments – AM1810 ARM® Microprocessor For PROFIBUS

AM1810
SPRS709D – NOVEMBER 2010 – REVISED MARCH 2014
www.ti.com
Table 6-75. Additional SPI0 Slave Timings, 5-Pin Option ^(1)(2)(3) (continued)
NO.
30 t_{dis(SPC_ENA)S}
PARAMETER
Delay from final clock receive
edge on SPI0_CLK to slave 3-
stating or driving high
SPI0_ENA. ⁽⁴⁾
Polarity = 0, Phase = 0,
from SPI0_CLK falling
Polarity = 0, Phase = 1,
from SPI0_CLK rising
Polarity = 1, Phase = 0,
from SPI0_CLK rising
Polarity = 1, Phase = 1,
from SPI0_CLK falling
1.2V
MIN
MAX
2.5P+17.5
2.5P+17.5
2.5P+17.5
2.5P+17.5
1.1V
MIN
MAX
2.5P+20
2.5P+20
2.5P+20
2.5P+20
1.0V
MIN
MAX
2.5P+27
2.5P+27
2.5P+27
2.5P+27
UNIT
ns
(4) SPI0_ENA is driven low after the transmission completes if the SPIINT0.ENABLE_HIGHZ bit is programmed to 0. Otherwise it is tri-stated. If tri-stated, an external pullup resistor should
be used to provide a valid level to the master. This option is useful when tying several SPI slave devices to a single master.
160 Peripheral Information and Electrical Specifications
Submit Documentation Feedback
Product Folder Links: AM1810
Copyright © 2010–2014, Texas Instruments Incorporated