BQ24153A_14 Datasheet, PDF (15/46 Pages) Texas Instruments – Fully Integrated Switch-Mode One-Cell Li-Ion Charger With Full USB Compliance and USB-OTG Support

www.ti.com
bq24153A, bq24156A
bq24158, bq24159
SLUSAB0C – OCTOBER 2010 – REVISED JULY 2013
OPERATIONAL FLOW CHART
Power Up
V BUS > V UVLO
V CSOUT < V LOWV
No
Reset and Start
15-M inute T imer
POR
Load I² C Registers
Yes
with Default Value
/CE = LOW
Disable Charge
Charge Configure
Mode
/CE = HIGH
High Impedance Mode or Host
Controlled Operation Mode
Any Charge State
Wait Mode
Delay TINT
V CSOPUT < V SHORT ?
No
Disable Charge
Indicate Power
not Good
Yes
No
Enable I _SHORT
Indicate Short
Circuit condition
Yes
V BUS < V IN ( MIN ) ?
No
15- Minute
Timer Expired ?
Regulate
Input Current , Charge
Current or Voltage
Yes
Indicate Charge- In -
Progress
Yes
VBUS < V IN ( MIN ) ?
Yes
No
15-Minute
Timer Expired ?
No
Yes
Turn Off Charge
Enable I _DETECT for
t DETECT
Turn Off Charge
Indicate Fault
/CE =HIGH
No
VCSOUT < V SHORT ?
No
Termination Enabled
ITERM detected
and VCSOUT > V OREG -V RCH
?
Yes
Yes
V CSOUT < VOREG -
V RCH ?
No
15-Minute Timer
Active ?
Yes
Charge Complete
High Impedance
Mode
Battery Removed
Yes
Reset Charge
Parameters
Wait Mode
Delay TINT
No
No
Charge Complete
Indicate DONE
V CSOUT < V OREG -
VRCH ?
Yes
Figure 26. Operational Flow Chart of bq2415x in Charge Mode
Copyright © 2010–2013, Texas Instruments Incorporated
Submit Documentation Feedback
15
Product Folder Links: bq24153A bq24156A bq24158 bq24159