DS50PCI402_15 Datasheet, PDF (1/38 Pages) Texas Instruments – DS50PCI402 2.5 Gbps / 5.0 Gbps 4 Lane PCI Express Repeater with Equalization and De-Emphasis

DS50PCI402
www.ti.com
SNLS320H – APRIL 2010 – REVISED MARCH 2013
DS50PCI402 2.5 Gbps / 5.0 Gbps 4 Lane PCI Express Repeater with
Equalization and De-Emphasis
Check for Samples: DS50PCI402
FEATURES
1
•2 Input and Output signal conditioning
increases PCIe reach in backplanes and
cables
• 0.09 UI of residual deterministic jitter at 5Gbps
after 42” of FR4 (with Input EQ)
• 0.11 UI of residual deterministic jitter at 5Gbps
after 7m of PCIe Cable (with Input EQ)
• 0.09 UI of residual deterministic jitter at 5Gbps
with 28” of FR4 (with Output DE)
• 0.13 UI of residual deterministic jitter at 5Gbps
with 7m of PCIe Cable (with Output DE)
• Adjustable Transmit VOD 800 to 1200mVp-p
• Automatic and manual Receiver Detection and
input termination control circuitry
• Automatic power management on an
individual lane basis via SMBus
• Adjustable electrical idle detect threshold.
• Data rate optimized 3-stage equalization to 27
dB gain
• Data rate optimized 6-level 0 to 12 dB transmit
de-emphasis
• Flow-thru pinout in 10mmx5.5mm 54-pin
leadless WQFN package
• Single supply operation at 2.5V
• >6kV HBM ESD rating
• -10 to 85°C operating temperature range
DESCRIPTION
The DS50PCI402 is a low power, 4 lane bidirectional
buffer/equalizer designed specifically for PCI Express
Gen1 and Gen2 applications. The device performs
both receive equalization and transmit de-emphasis,
allowing maximum flexibility of physical placement
within a system. The receiver is capable of opening
an input eye that is completely closed due to inter-
symbol interference (ISI) induced by the interconnect
medium.
The transmitter de-emphasis level can be set by the
user depending on the distance from the
DS50PCI402 to the PCI Express endpoint. The
DS50PCI402 contains PCI Express specific functions
such as Transmit Idle, RX Detection, and Beacon
signal pass through.
The device provides automatic receive detection
circuitry which controls the input termination
impedance. By automatically reflecting the current
load impedance seen on the outputs back to the
corresponding inputs the DS50PCI402 becomes
completely transparent to both the PCIe root complex
and endpoint. An internal rate detection circuit is
included to detect if an incoming data stream is at
Gen2 data rates, and adjusts the de-emphasis on it's
output accordingly. The signal conditioning provided
by the device allows systems to upgrade from Gen1
data rates to Gen2 without reducing their physical
reach. This is true for FR4 applications such as
backplanes, as well as cable interconnect.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010–2013, Texas Instruments Incorporated