|
DRV8801-Q1_16 Datasheet, PDF (1/28 Pages) Texas Instruments – DMOS Full-Bridge Motor Drivers | |||
|
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
DRV8801-Q1
SLVSAS7B â FEBRUARY 2011 â REVISED JANUARY 2016
DRV8801-Q1 DMOS Full-Bridge Motor Drivers
1 Features
â¢1 Qualified for Automotive Applications
⢠AEC-Q100 Qualified With The Following Results:
â Device Temperature Grade 1: TA = â40ºC to
125ºC
â Device HBM ESD Classification Level H2
â Device CDM ESD Classification Level C4
⢠Low RDS(on) Outputs (0.83-Ω HS + LS Typical)
⢠Low-Power Sleep Mode
⢠100% PWM Supported
⢠8â38 V Operating Supply Voltage Range
⢠Thermally Enhanced Surface Mount Package
⢠Configurable Overcurrent Limit
⢠Protection Features
â VBB Undervoltage Lockout (UVLO)
â Overcurrent Protection (OCP)
â Short-to-supply Protection
â Short-to-ground Protection
â Overtemperature Warning (OTW)
â Overtemperature Shutdown (OTS)
â Overcurrent and Overtemperature Fault
Conditions Indicated on Pins (nFAULT)
3 Description
The DRV8801-Q1 provides a versatile power driver
solution with a full H-bridge driver. The device can
drive a brushed DC motor or one winding of a
stepper motor, as well as other devices like
solenoids. A simple PHASE/ENABLE interface allows
easy interfacing to controller circuits
The output stages use N-channel power MOSFETs
configured as ½-H-bridges. The DRV8801-Q1 is
capable of peak output currents up to ±2.8 A and
operating voltages up to 38 V. An internal charge
pump generates needed gate drive voltages.
A low-power sleep mode is provided which shuts
down internal circuitry to achieve very low quiescent
current draw. This sleep mode can be set using a
dedicated nSLEEP pin.
Internal protection functions are provided:
undervoltage lockout, overcurrent protection, short-to-
supply protection, short-to-ground protection,
overtemperature warning, and overtemperature
shutdown. Overcurrent (including short-to-ground and
short-to-supply) and overtemperature fault conditions
are indicated via an nFAULT pin.
The DRV8801-Q1 is packaged in a 16-pin QFN
PowerPAD⢠package, providing enhanced thermal
dissipation.
2 Applications
⢠Automotive Body Systems
⢠Door Locks
⢠HVAC Actuators
⢠Piezo Alarm
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
DRV8801-Q1
QFN (16)
4.00 mm à 4.00 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Simplified Schematic
8 V to 38 V
PH/EN
DRV8801-Q1
Controller
nSLEEP
nFAULT
VPROPI
Brushed DC
Motor Driver
Protection
BDC
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. UNLESS OTHERWISE NOTED, this document contains PRODUCTION
DATA.
|
▷ |