BQ24725A_17 Datasheet, PDF (1/47 Pages) Texas Instruments – 1-4 Cell Li+ Battery SMBus Charge Controller with N-Channel Power MOSFET Selector and Advanced Circuit Protection

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
bq24725A
SLUSAL0A – SEPTEMBER 2011 – REVISED AUGUST 2014
bq24725A 1-4 Cell Li+ Battery SMBus Charge Controller with N-Channel Power MOSFET
Selector and Advanced Circuit Protection
1 Features
•1 SMBus Host-Controlled NMOS-NMOS
Synchronous Buck Converter with Programmable
615kHz, 750kHz, and 885kHz Switching
Frequencies
• Automatic N-channel MOSFET Selection of
System Power Source from Adapter or Battery
Driven by Internal Charge Pumps
• Enhanced Safety Features for Over Voltage
Protection, Over Current Protection, Battery,
Inductor and MOSFET Short Circuit Protection
• Programmable Input Current, Charge Voltage,
Charge Current Limits
– ±0.5% Charge Voltage Accuracy up to 19.2V
– ±3% Charge Current Accuracy up to 8.128A
– ±3% Input Current Accuracy up to 8.064A
– ±2% 20x Adapter Current or Charge Current
Amplifier Output Accuracy
• Programmable Battery Depletion Threshold, and
Battery LEARN Function
• Programmable Adapter Detection and Indicator
• Integrated Soft Start
• Integrated Loop Compensation
• Real Time System Control on ILIM pin to Limit
Charge Current
• AC Adapter Operating Range 4.5V-24V
• 5µA Off-State Battery Discharge Current
• 0.65mA (0.8mA max) Adapter Standby Quiescent
Current
• 20-pin 3.5 x 3.5 mm² VQFN Package
2 Applications
• Portable Notebook Computers, UMPC, Ultra-Thin
Notebook, and Netbook
• Handheld Terminal
• Industrial and Medical Equipment
• Portable Equipment
3 Description
The bq24725A is a high-efficiency, synchronous
battery charger, offering low component count for
space-constraint, multi-chemistry battery charging
applications.
The bq24725A utilizes two charge pumps to
separately drive n-channel MOSFETs (ACFET,
RBFET and BATFET) for automatic system power
source selection.
SMBus controlled input current, charge current, and
charge voltage DACs allow for very high regulation
accuracies that can be easily programmed by the
system power management micro-controller.
The bq24725A uses internal input current register or
external ILIM pin to throttle down PWM modulation to
reduce the charge current.
The bq24725A charges one, two, three or four series
Li+ cells.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
bq24725A
VQFN (20)
3.50mm x 3.50mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Adapter
4.5-24V
N-FET Driver
R_{AC Enhanced Safety:}
OCP, OVP, FET Short
Adapter Detection
bq24725A
SMBus Controls V & I
with high accuracy
SMBus
Hybrid Power
Boost Charge
Controller
HOST
SYS
N-FET Driver
Battery
Pack
R_SR
1S-4S
Integration:
Loop Compensation; Soft-Start
Comparator
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.