AMC7836_15 Datasheet, PDF (50/87 Pages) Texas Instruments – AMC7836 High-Density, 12-Bit Analog Monitor and Control Solution With Multichannel ADC, Bipolar DACs, Temperature Sensor, and GPIO Ports

AMC7836
SLAS986B – NOVEMBER 2014 – REVISED FEBRUARY 2015
7.6.2.6 Manufacturer ID High Byte Register (address = 0x0D) [reset = 0x04]
www.ti.com
Figure 72. Manufacturer ID High Byte Register
7
6
5
4
3
2
1
0
VENDORID-HIGH
R-0x04
Table 17. Manufacturer ID High Byte Register Field Descriptions
Bit Field
7-0 VENDORID-HIGH
Type
R
Reset
0x04
Description
Manufacturer ID. High byte
7.6.3 Register Update (Buffered Registers): Address 0x0F
7.6.3.1 Register Update Register (address = 0x0F) [reset = 0x00]
Figure 73. Register Update Register (Self Clearing) [R/W]
7
6
5
4
3
2
1
Reserved
ADC-UPDATE
Reserved
R/W-All Zeros
R/W-0
R/W-All Zeros
0
UPDATE
R/W-0
Bit Field
7-5 Reserved
4
ADC-UPDATE
3-1 Reserved
0
DAC-UPDATE
Table 18. Register Update Register Field Descriptions
Type
R/W
R/W
R/W
R/W
Reset
All zeros
0
All zeros
0
Description
Reserved for factory use
When set transfers the latest ADC and temperature conversion
data to the ADC and Temperature Data registers. This function
is needed when operating the ADC in auto-cycle mode
Reserved for factory use
DAC update (self clearing)
0: disabled
1: enabled – transfers data from buffers to active registers
(DAC registers only)
50
Submit Documentation Feedback
Product Folder Links: AMC7836
Copyright © 2014–2015, Texas Instruments Incorporated