TLC6C5712-Q1_15 Datasheet, PDF (42/64 Pages) Texas Instruments – TLC6C5712-Q1 12-Channel, Full-Diagnostic, Constant-Current-Sink LED Driver With 8-Bit Dot Correction

TLC6C5712-Q1
SLVSCO9A – AUGUST 2015 – REVISED AUGUST 2015
www.ti.com
7.5.47 READ_MAP4 Register (address = 84h) [reset = 00h]
Address 44h is used for writing the MAP4 data using the register pseudonym WRITE_MAP4, and address 84h is
used for reading the MAP4 data using the register pseudonym READ_MAP4. See the WRITE_MAP4 Register
(address = 44h) [reset = 00h] section for a description of the register contents.
Figure 69. READ_MAP4 Register, Address 84h
7
6
5
4
3
RESERVED
PWM_MAP_CH9[2:0]
R
R/W
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
2
1
0
PWM_MAP_CH8[2:0]
R/W
7.5.48 READ_MAP5 Register (address = 85h) [reset = 00h]
Address 45h is used for writing the MAP5 data using the register pseudonym WRITE_MAP5, and address 85h is
used for reading the MAP5 data using the register pseudonym READ_MAP5. See the WRITE_MAP5 Register
(address = 45h) [reset = 00h] section for a description of the register contents.
Figure 70. READ_MAP5 Register, Address 85h
7
6
5
4
3
RESERVED
PWM_MAP_CH11[2:0]
R
R/W
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
2
1
0
PWM_MAP_CH10[2:0]
R/W
7.5.49 READ_CORR0 Register (address = 86h) [reset = 00h]
Address 46h is used for writing the CORR0 data using the register pseudonym WRITE_CORR0, and address
86h is used for reading the CORR0 data using the register pseudonym READ_CORR0. See the WRITE_CORR0
Register (address = 46h) [reset = 00h] section for a description of the register contents.
Figure 71. READ_CORR0 Register, Address 86h
7
6
5
4
3
2
1
0
OUTPUT_DC_CH0[7:0]
R/W
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
7.5.50 READ_CORR1 Register (address = 87h) [reset = 00h]
Address 47h is used for writing the CORR1 data using the register pseudonym WRITE_CORR1, and address
86h is used for reading the CORR1 data using the register pseudonym READ_CORR1. See the WRITE_CORR1
Register (address = 47h) [reset = 00h] section for a description of the register contents.
Figure 72. READ_CORR1 Register, Address 87h
7
6
5
4
3
2
1
0
OUTPUT_DC_CH1[7:0]
R/W
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
42
Submit Documentation Feedback
Product Folder Links: TLC6C5712-Q1
Copyright © 2015, Texas Instruments Incorporated