GTL2010 Datasheet, PDF (4/15 Pages) NXP Semiconductors – 10-bit GTL Processor Voltage Clamp

GTL2010
10-BIT BIDIRECTIONAL LOW-VOLTAGE TRANSLATOR
SCDS221 – SEPTEMBER 2006
Absolute Maximum Ratings^(1)(2)(3)
www.ti.com
V_SREF
V_DREF
V_GREF
V_Sn
V_Dn
I_REFK
I_SK
I_DK
I_MAX
θ_JA
T_stg
DC source reference voltage
DC drain reference voltage
DC gate reference voltage
DC voltage port Sn
DC voltage port Dn
DC diode current on reference pins
DC diode current port Sn
DC diode current port Dn
DC clamp current per channel
Package thermal impedance
Storage temperature range
V_I < 0 V
V_I < 0 V
V_I < 0 V
Channel in ON state
MIN
MAX UNIT
–0.5
7V
–0.5
7V
–0.5
7V
–0.5
7V
–0.5
7V
–50 mA
–50 mA
–50 mA
±128 mA
88 °C/W
–65
150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction
temperatures that are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C.
(3) The input and output negative voltage ratings may be exceeded if the input and output clamp current ratings are observed.
Recommended Operating Conditions
V_I/O
V_SREF
V_DREF
V_GREF
I_PASS
T_amb
Input/output voltage (Sn, Dn)
DC source reference voltage⁽¹⁾
DC drain reference voltage
DC gate reference voltage
Pass transistor current
Operating ambient temperature range (in free air)
(1) V_SREF = V_DREF – 1.5 V for best results in level-shifting applications.
MIN MAX UNIT
0 5.5 V
0 5.5 V
0 5.5 V
0 5.5 V
64 mA
–40
85 °C
4
Submit Documentation Feedback