DS125BR401SQ Datasheet, PDF (36/52 Pages) Texas Instruments – Low-Power 12.5-Gbps 4-Lane Repeater With Input Equalization and Output De-Emphasis

DS125BR401
SNLS419C – JULY 2012 – REVISED APRIL 2013
www.ti.com
POWER SUPPLY BYPASSING
Two approaches are recommended to ensure that the DS125BR401 is provided with an adequate power supply.
First, the supply (VDD) and ground (GND) pins should be connected to power planes routed on adjacent layers
of the printed circuit board. The layer thickness of the dielectric should be minimized so that the V_DD and GND
planes create a low inductance supply with distributed capacitance. Second, careful attention to supply
bypassing through the proper use of bypass capacitors is required. A 0.1 μF bypass capacitor should be
connected to each V_DD pin such that the capacitor is placed as close as possible to the DS125BR401. Smaller
body size capacitors can help facilitate proper component placement. Additionally, capacitor with capacitance in
the range of 1 μF to 10 μF should be incorporated in the power supply bypassing design as well. These
capacitors can be either tantalum or an ultra-low ESR ceramic.
36
Submit Documentation Feedback
Copyright © 2012–2013, Texas Instruments Incorporated
Product Folder Links: DS125BR401