AM1810_15 Datasheet, PDF (258/262 Pages) Texas Instruments – AM1810 ARM® Microprocessor For PROFIBUS

AM1810
SPRS709D – NOVEMBER 2010 – REVISED MARCH 2014
www.ti.com
7.5 Electrostatic Discharge Caution
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
7.6 Glossary
SLYZ022 — TI Glossary.
This glossary lists and explains terms, acronyms and definitions.
8 Mechanical Packaging and Orderable Information
This section describes the device orderable part numbers, packaging options, materials, thermal and
mechanical parameters.
8.1 Thermal Data for ZWT Package
The following table(s) show the thermal resistance characteristics for the PBGA–ZWT mechanical
package.
Table 8-1. Thermal Resistance Characteristics (PBGA Package) [ZWT]
NO.
°C/W ⁽¹⁾
AIR FLOW (m/s)⁽²⁾
1
RΘ_JC
2
RΘ_JB
3
RΘ_JA
4
Junction-to-case
Junction-to-board
Junction-to-free air
7.3
N/A
12.4
N /A
23.7
0.00
21.0
0.50
5
6
RΘ_JMA
Junction-to-moving air
20.1
1.00
19.3
2.00
7
18.4
4.00
8
0.2
0.00
9
0.3
0.50
10 Psi_JT
11
Junction-to-package top
0.3
1.00
0.4
2.00
12
0.5
4.00
13
12.3
0.00
14
12.2
0.50
15 Psi_JB
16
Junction-to-board
12.1
1.00
12.0
2.00
17
11.9
4.00
(1) These measurements were conducted in a JEDEC defined 2S2P system and will change based on environment as well as application.
For more information, see these EIA/JEDEC standards – EIA/JESD51-2, Integrated Circuits Thermal Test Method Environment
Conditions - Natural Convection (Still Air) and JESD51-7, High Effective Thermal Conductivity Test Board for Leaded Surface Mount
Packages. Power dissipation of 1W and ambient temp of 70C assumed. PCB with 2oz (70um) top and bottom copper thickness and
1.5oz (50um) inner copper thickness
(2) m/s = meters per second
258 Mechanical Packaging and Orderable Information
Copyright © 2010–2014, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: AM1810