THCV226_16 Datasheet, PDF (4/27 Pages) THine Electronics, Inc. – THCV226 is designed to support video data transmission between the host and display.

BET_EN
125
I
Field-BET enable
1 : Enable
0 : Normal operation
BET_LAT
126
I
Latch select input under Field BET operation
1 : Latched result output
0 : Reset latched result
MON_EN
124
I
Monitoring mode enable
1 : Monitoring enable
0 : Monitoring disable
PRBS
3
I
Must be tied to GND or used for Monitoring Signal
Function, refer to Table10.
RS
4
I
LVDS swing level select
1 : Normal swing (350mV)
0 : Reduced swing (200mV)
MAP
5
I
LVDS output format select
1 : JEIDA format
0 : VESA format
PDN
9
I
Power down
1 : Normal operation
0 : Power down operation
BETOUT
127
O
Field BET result output
Reserved 0,1,2,3,4,5
6, 7, 8, 93, 94, I
Must be tied to GND
95
Reserved 6,7
97, 98
O
Must be open
CVDD
10, 30, 67, 86, PWR 1.8V power supply for Logic block
VVDD
104, 121
106, 112, 119
PWR 1.8V power supply for V-by-One^® HS block
LVDD
12, 18, 24, 32, PWR 1.8V power supply for LVDS block
40, 58, 65, 73,
79, 85
PVDD
11
PWR 1.8V power supply for PLL block
LPVDD
46, 52
PWR 1.8V power supply for LVDS analog block
IOVDD
2, 100,
PWR 1.8V power supply for LVTTL I/O buffer
GND
1, 13, 19, 25, GND Ground
31, 39, 45, 51,
57, 66, 72, 78,
84, 87, 96, 105,
109, 113, 116,
120, 128
CI : CML Input buffer , LO : LVDS Output buffer , BI : LVTTL Bi-directional buffer
I : LVTTL Input buffer , O : LVTTL Output buffer , OD : Open Drain buffer
PWR : 1.8V Power supply , GND : Ground
THCV226_Rev.1.10_E
Copyright©2015 THine Electronics, Inc.
4/27
THine Electronics, Inc.
Security E