71M6511 Datasheet, PDF (83/95 Pages) Teridian Semiconductor Corporation – Single-Phase Energy Meter IC

71M6511/71M6511H
Single-Phase Energy Meter IC
DATA SHEET
AUGUST 2007
SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS
Electrical Specifications
Supplies and Ground Pins:
V3P3D, V3P3A
| V3P3D - V3P3A |
VLCD
VBAT
GNDD
Analog Output Pins:
VREF, VBIAS
V2P5
Analog Input Pins:
IA, VA, IB
XIN, XOUT
RX
OPT_RX
Digital Input Pins:
−0.5V to 4.6V
0V to 0.5V
-0.5V to 7V
-0.5V to 4.6V
-0.5V to +0.5V
-1mA to 1mA,
-0.5 to V3P3A+0.5V
-1mA to 1mA,
-0.5V to 3.0V
-0.5V to V3P3A+0.5V
-0.5V to 3.0V
-0.5V to 3.6V
-1mA to 1mA
-0.5 to V3P3A+0.5V
DIO4-11, DIO14-17, E_RXTX, E_RST
-0.5 to 6V
TEST, RESETZ
-0.5 to V3P3D+0.5V
All Other Pins:
Input pins
-5mA to 5mA
-0.5V to V3P3D+0.5V
Output pins
-30mA to 30mA
-0.5 to V3P3D+0.5V
Temperature:
Operating junction temperature (peak, 100ms)
Operating junction temperature (continuous)
140 °C
125 °C
Storage temperature
Solder temperature – 10 second duration
−45 °C to 165 °C
250 °C
ESD Stress:
Pins IA, VA, IB, RX, TX, E_RST, E_TCLK, E_RXTX
6kV
All other pins
2kV
Stresses beyond Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only and functional
operation at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability. All voltages are with respect to GNDA.
Page: 83 of 95
© 2005-2007 TERIDIAN Semiconductor Corporation
V2.6