STCD2400 Datasheet, PDF (27/39 Pages) STMicroelectronics – Multichannel clock distribution circuit

STCD22x0, STCD23x0, STCD24x0
6
Maximum ratings
Maximum ratings
Stressing the device above the rating listed in the absolute maximum ratings table may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other conditions above those indicated in the operating sections of
this specification is not implied. Exposure to absolute maximum rating conditions for
extended periods may affect device reliability. Refer also to the STMicroelectronics SURE
Program and other relevant quality documents.
Table 8. Absolute maximum ratings
Symbol
Parameter
Value
Unit
T_STG
Storage temperature (V_CC off)
–55 to 150
°C
T_SLD(1)
Lead-free bump solder temperature for 10 seconds
260
°C
T_J
Maximum junction temperature
150
°C
V_CC
Supply voltage
–0.3 to 6
V
V_IN
Input clock voltage
–0.3 to 3.6
V
V_EN
Voltage on enable pins
–0.3 to 3.6
V
V_OPT
Optional pins voltage
–0.3 to 6
V
MC_REQ Master clock request
–0.3 to 3.6
V
1. Reflow at peak temperature of 260 °C. The time above 255 °C must not exceed 30 seconds.
Doc ID 15400 Rev 2
27/39