English
Language : 

STM8L151X6 Datasheet, PDF (143/146 Pages) STMicroelectronics – Operating conditions
STM8L151x6/8 STM8L152x6/8
Revision history
Date
03-Apr-2013
31-Jul-2013
Table 70. Document revision history (continued)
Revision
Changes
Updated capacitive sensing channels and “Dynamic consumption” in
Features
Updated LCD feature in Table 2: High-density and medium+ density
STM8L15xx6/8 low power device features and peripheral counts
Updated Halt mode definition in Section 3.1: Low-power modes
Added Bootloader
Updated Section 3.12: System configuration controller and routing
interface
Added Section 3.13: Touch sensing
Table 5: High-density and medium+ density STM8L15x pin description:
updated NRST/PA1, PI0, PI1, PI2, PE0, PE1, PE2, PF4, PF5, PF6,
PF7, footnote 1. and added Note:
5
Updated ‘0x00 502E to 0x00 5049’ reserved area in Table 9: General
hardware register map
Updated reference to SWIM/DEBUG manual in Section 7: Option bytes
Updated BOR factory default settings to 0x00 in Table 12: Option byte
addresses
Corrected ROP option byte value in Table 12: Option byte addresses
Added Figure 45: Maximum dynamic current consumption on VREF+
supply pin during ADC conversion
Updated STABVREFINT max value in Table 46: Reference voltage
characteristics
Updated Figure 41: SPI1 timing diagram - master mode
Added Table 57: RAIN max for fADC = 16 MHz
Updated Max DAC_OUT in Table 50: DAC characteristics
Updated Section 9.3.12: Comparator characteristics
Added ‘Top view’ footnotes under the pinout figures in Section 4: Pin
description
Updated the PF4-PF7 pins for the LQFP80 in Table 5: High-density and
medium+ density STM8L15x pin description
Updated all packages:
6
Updated Figure 57: UFQFPN48 - 48-lead, 7x7 mm, 0.5 mm pitch, ultra
thin fine pitch quad flat package outline and Table 65: LQFP48 - 48-pin,
7 x 7 mm low-profile quad flat package mechanical data
Added Figure 49: LQFP80 - 80-pin, 14 x 14 mm low-profile quad flat
package recommended footprint
Added ‘tape and reel’ in Table 69: Ordering information scheme
DocID17943 Rev 10
143/146
145