ST10F296E Datasheet, PDF (1/346 Pages) STMicroelectronics – High performance 16-bit CPU with DSP functions

ST10F296E
16-bit MCU with MAC unit, 832 Kbyte Flash memory
and 68 Kbyte RAM
Features
■ High performance 16-bit CPU with DSP
functions
– 31.25 ns instruction cycle time at 64 MHz
) ^{max CPU clock}
t(s ^{– Multiply/accumulate unit (MAC) 16 x 16-bit}
multiplication, 40-bit accumulator
uc _{– Enhanced boolean bit manipulation}
d _facilities
ro ⁾ _{– Single-cycle context switching support}
P _{t(s ■ Memory organization}
lete ^{uc – 512 Kbyte Flash memory (32-bit fetch)}
d _{– 320 Kbyte extension Flash memory}
so ^{ro (16-bit fetch)}
b ^P – 100 k erasing/programming cycles
- ^{O te – Up to 16 Mbyte linear address space for}
) ^{le code and data (5 Mbytes with CAN or I2C)}
t(s ^{o – 2 Kbyte on-chip internal RAM (IRAM)}
s _{– 66 Kbyte on-chip extension RAM (XRAM)}
c ^b _{– Programmable external bus characteristics}
du _- ^O for different address ranges
ro ^{) – Five programmable chip-select signals}
P _t(s – Hold-acknowledge bus arbitration support
te ^{c ■ Interrupt}
le du ^{– 8-channel peripheral event controller for}
so ^{ro single cycle interrupt driven data transfer}
– 16-priority-level interrupt system with 56
b P _{sources, sampling rate down to 15.6 ns}
O _{te ■ Timers}
le _{– Two multi-functional general purpose timer}
sounits with 5 timers
Ob^{■ Two 16-channel capture/compare units}
PBGA 208
(23 x 23 x 1.96 mm)
■ Serial channels
– Two synchronous/asynch. serial channels
– Two high-speed synchronous channels
– I²C standard interface
■ Two CAN 2.0B interfaces operating on one or
two CAN busses (64 or 2 x 32 message
objects, C-CAN version)
■ Fail-safe protection
– Programmable watchdog timer
– Oscillator watchdog
■ On-chip bootstrap loader
■ Clock generation
– On-chip PLL and 4-12 MHz oscillator
– Direct or prescaled clock input
■ Real-time clock
■ Up to 143 general purpose I/O lines
– Individually programmable as input, output
or special function
– Programmable threshold (hysteresis)
■ Idle, power-down and stand-by modes
■ single voltage supply: 5 V ±10% (embedded
regulator for 1.8 V core supply).
■ Analog-to-digital converter (ADC)
Table 1. Device summary
– 32-channel 10-bit
– 3 µs minimum conversion time
Order codes
Temp. range
(°C)
CPU freq. range
(MHz)
– TImer for ADC channel injection
■ 4-channel PWM unit and 4-channel XPWM
ST10F296
ST10F296TR
-40 to 125
1 to 64
October 2008
Rev 2
1/346
www.st.com
1