S6E2H1 Datasheet, PDF (69/159 Pages) SPANSION – processor version

S6E2H1 Series
12. Electrical Characteristics
12.1 Absolute Maximum Ratings
Parameter
Power supply voltage *¹, *²
Power supply voltage (VBAT) *^{1 ,}*⁴
Analog power supply voltage *^{1 ,}*⁵
Analog reference voltage *^{1 ,}*⁵
Input voltage *¹
Symbol
VCC
VBAT
AVCC
AVRH
VI
Rating
Min
Max
VSS - 0.5
VSS + 6.5
VSS - 0.5
VSS + 6.5
VSS - 0.5
VSS - 0.5
VSS - 0.5
VSS + 6.5
VSS + 6.5
VCC + 0.5
(≤ 6.5 V)
VSS - 0.5
VSS + 6.5
Analog pin input voltage *¹
VIA
VSS - 0.5
AVCC + 0.5
(≤ 6.5 V)
Output voltage *¹
VO
VSS - 0.5
VCC + 0.5
(≤ 6.5 V)
10
L level maximum output current *⁶
L level average output current *⁷
L level total maximum output current
L level total average output current *⁸
IOL
-
IOLAV
-
∑IOL
-
∑IOLAV
-
20
20
22.4
4
8
12
20
100
50
H level maximum output current *⁶
- 10
IOH
-
20
H level average output current *⁷
IOHAV
-
H level total maximum output current
∑IOH
-
H level total average output current *⁸
∑IOHAV
-
Storage temperature
TSTG
- 55
*1: These parameters are based on the condition that VSS = AVSS = 0.0 V.
- 20
-4
8
- 12
- 100
- 50
+ 150
Unit
Remarks
V
V
V
V
V
V 5 V tolerant
V
V
mA 4 mA type
mA 8 mA type
mA 12 mA type
mA I²C Fm+
mA 4 mA type
mA 8 mA type
mA 12 mA type
mA I²C Fm+
mA
mA
mA 4 mA type
mA 8 mA type
mA 12 mA type
mA 4 mA type
mA 8 mA type
mA 12 mA type
mA
mA
°C
*2: VCC must not drop below VSS - 0.5 V.
*3: VBAT must not drop below VSS - 0.5 V.
*4: Ensure that the voltage does not exceed VCC + 0.5 V, for example, when the power is turned on.
*5: The maximum output current is defined as the value of the peak current flowing through any one of the
corresponding pins.
*6: The average output current is defined as the average current value flowing through any one of the
corresponding pins for a 100-ms period.
*7: The total average output current is defined as the average current value flowing through all of
corresponding pins for a 100-ms.
WARNING:
− Semiconductor devices may be permanently damaged by application of stress (including, without limitation, voltage, current or
temperature) in excess of absolute maximum ratings.
Do not exceed any of these ratings.
Document Number: 001-98940 Rev.*A
Page 69 of 159