S6E2H1 Datasheet, PDF (4/159 Pages) SPANSION – processor version

S6E2H1 Series
Deep standby stop (selectable from with/without RAM
retention)
VBAT
The consumption power during the RTC operation can be
reduced by supplying the power supply independent from the
RTC (calendar circuit)/32 kHz oscillation circuit. The following
circuits can also be used.
 RTC
32 kHz oscillation circuit
Power-on circuit
Back up register : 32 bytes
Port circuit
Debug
Serial Wire JTAG Debug Port (SWJ-DP)
Embedded Trace Macrocells (ETM) provide comprehensive
debug and trace facilities.
Unique ID
Unique value of the device (41-bit) is set.
Power Supply
Three Power Supplies
Wide range voltage: VCC = 2.7 V to 5.5 V
Power supply for VBAT: VBAT = 2.7 V to 5.5 V
Document Number: 001-98940 Rev.*A
Page 4 of 159