LAN8187_06 Datasheet, PDF (44/72 Pages) SMSC Corporation – ±15kV ESD Protected MII/RMII Fast-Ethernet PHY with HP Auto-MDIX and SMSC flexPWRTM

±15kV ESD Protected MII/RMII Fast-Ethernet PHY with HP Auto-MDIX and SMSC flexPWR^TM
Datasheet
Table 5.34 Register 4 - Auto Negotiation Advertisement (continued)
ADDRESS
4.8
NAME
100Base-TX Full
Duplex
DESCRIPTION
1 = TX with full duplex,
0 = no TX full duplex ability
4.7
100Base-TX
1 = TX able,
0 = no TX ability
4.6
10Base-T Full 1 = 10Mbps with full duplex
Duplex
0 = no 10Mbps with full duplex ability
4.5
10Base-T
1 = 10Mbps able,
0 = no 10Mbps ability
4.4:0
Selector Field [00001] = IEEE 802.3
MODE DEFAULT
RW
Set by
MODE[2:0]
bus
RW
1
RW
Set by
MODE[2:0]
bus
RW
Set by
MODE[2:0]
bus
RW
00001
Table 5.35 Register 5 - Auto Negotiation Link Partner Ability
ADDRESS
5.15
5.14
5.13
5.12:11
5.10
5.9
5.8
5.7
5.6
5.5
5.4:0
NAME
Next Page
Acknowledge
Remote Fault
Reserved
Pause Operation
100Base-T4
100Base-TX Full
Duplex
100Base-TX
10Base-T Full
Duplex
10Base-T
Selector Field
DESCRIPTION
MODE DEFAULT
1 = “Next Page” capable,
0 = no “Next Page” ability
This Phy does not support next page ability.
RO
0
1 = link code word received from partner
0 = link code word not yet received
RO
0
1 = remote fault detected,
0 = no remote fault
RO
0
RO
0
1 = Pause Operation is supported by remote MAC,
RO
0
0 = Pause Operation is not supported by remote MAC
1 = T4 able,
0 = no T4 ability.
This Phy does not support T4 ability.
RO
0
1 = TX with full duplex,
0 = no TX full duplex ability
RO
0
1 = TX able,
0 = no TX ability
RO
0
1 = 10Mbps with full duplex
0 = no 10Mbps with full duplex ability
RO
0
1 = 10Mbps able,
0 = no 10Mbps ability
RO
0
[00001] = IEEE 802.3
RO
00001
Revision 1.0 (12-14-06)
44
DATASHEET
SMSC LAN8187/LAN8187I